Sanyo DSR-3009P Adding a hard disk, F NETWORK SET SETTING Network connection, General Setting

GENERAL SETTING

3 Turn the shuttle dial clockwise.

A WARNING screen appears and then “NO” flashes.

<WARNING>

THIS CHANGE WILL INITIALIZE THE DISK.

ALL RECORDING WILL BE ERASED.

ARE YOU SURE ?

NO

CHANGE LINES WITH JOG. SELECT WITH SHUTTLE

4 Use the jog dial to select YES, and then turn the shuttle dial.

The “HDD INITIALIZING!” screen appear and the hard disk is initialized. Then the display is returned to the HDD SET screen.

HDD INITIALIZING !

5 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

Adding a hard disk

Consult the place of purchase if you would like to add a hard disk. If adding a hard disk, use an additional hard disk unit (sold separately).

FNETWORK SET SETTING

Network connection

Insert a recommended commercially-available LAN card or PC card (Ethernet card) into the PC card slot at the rear of the digital video recorder. This will enable you to view images on this unit and make menu settings through the network (LAN) from a personal computer.

• When connecting directly to the computer (without using an

Ethernet hub)

1 – 16

Main monitor

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

TV monitor

(sold separately)

1	Computer
	Always use a
	cross-type
2 3	Ethernet cable.

•When connecting via an intranet (using an Ethernet hub)

1 – 16

Main monitor

1	2	3	4
5	6	7	8
9	10	11	12
13	14	15	16

TV monitor

(sold separately)

2 Ethernet switching hub Computer

2 3

Always use a straight- type Ethernet cable.

Note: If adding another hard disk, be sure to initialize the hard disks. When this is done, both hard disks will be initialized, so that any existing data on the original hard disk will be cleared.

Reference: HDD SET screen

Computer

Intranet

•MIRRORING: When a hard disk is added, or if a 160 GB hard disk is installed, it is possible to record the same images on two hard disks. This means that even if an image write error occurs you will be able to read from an area where there is no write error.

•PLAYBACK DRIVE: After MIRRORING has been set, you will be able to specify which of the two hard disks is to be used for reading the recorded image.

With mirroring setting, if an error has occurred in the playback image, switch from the hard disk in current use (DISK1) to (DISK2).

Ethernet switching hub

Inserting the recommended LAN card

(Installed)(Removed)

1

3

2

3

12

Locking can be carried out easily by sliding the knob.

Return the knob after unlocking.

Note: The PC card slot is for 16-bit 5 V cards only.

Do not use 32-bit card bus types of card, as they may damage the PC card slot of the digital video recorder.

English 77