Manuals / Sanyo / TV and Video / DVR

Sanyo DSR-3009P instruction manual Alarm trigger setting, Recording Setting

Models: DSR-3009P

1 95

Download 95 pages 9.88 Kb

Page 64

Alarm trigger setting

RECORDING SETTING

Alarm trigger setting

1 Use the jog dial to move the cursor to the ALARM TRIGGER setting.

	<ALARM REC MODE SET>
PICTURE QUALITY			:	SUPER FINE
AUDIO	RECORDING		:	ON
ALARM	RECORDING		:	ENABLED
ALARM	INTERLEAVE		:	ONLY
PROGRAM GROUP			:	OFF
REC	RATE: @	8.33FPS,		DURATION:		5SEC
PRE-ALARM RECORDING			:	ON
REC	RATE: @	12.5FPS,		DURATION:		5
=>	(01010 ALARMS CAN BE RECORDED )
ALARM	TRIGGER		:	ALARM

2 Turn the shuttle dial clockwise, use the jog dial to select the method of detecting intruders (example: “SENSOR” ), and then turn the shuttle dial clockwise.

The cursor moves to PICTURE QUALITY.

ALARM	INTERLEAVE		:	ONLY
PROGRAM GROUP			:	OFF
REC	RATE: @	8.33FPS,		DURATION:	5SEC
PRE-ALARM RECORDING			:	ON
REC	RATE: @	12.5FPS,		DURATION:	5
=>	(01010 ALARMS CAN BE RECORDED )
ALARM	TRIGGER		:	SENSOR

Display examples: Alarm recording trigger settings

•ALARM: Alarm recording is carried out when an external alarm (when a switch is connected to the ALARM IN terminals at the rear of the digital video recorder for open/close operation occurs).

•SENSOR: Alarm recording is only carried out when the motion sensor detects a moving object. Refer to motion sensor settings. (See page 67.)

•ALARM AND SENSOR: Alarm recording is carried out when there is a response from both an external alarm and a built-in motion sensor.

•ALARM OR SENSOR: Alarm recording is carried out when there is a response from either an external alarm or a built-in motion sensor.

Note:

•MOTION SENSOR settings must be made if SENSOR, ALARM AND SENSOR or ALARM OR SENSOR is selected.

•The digital video recorder’s built-in motion sensor cannot be used if a multiplexer is connected to the digital video recorder.

•If using the built-in sensor of a multiplexer, the alarm output should be directed to the alarm input of the digital video recorder in order to record alarms.

•If you stop recording while alarm recording that has been triggered by a motion sensor is in progress, move the cursor to the ALARM OPERATION SET setting in the menu screen and then turn the shuttle dial clockwise. The motion sensor screen appears, so use this screen to change the LEVEL setting to “OFF”.

English

63

Image 64

Sanyo DSR-3009P Alarm trigger setting, Recording Setting, Use the jog dial to move the cursor to the ALARM TRIGGER setting

Contents

DSR-3016P DSR-3009P Digital Video Recorder with Multiplexer FunctionInstruction Manual BedienungsanleitungPRECAUTION SERVICELocation Avoiding Electrical Shock and FireCONTENTS RECORDING IMAGES IN THE ALARM RECORDING AREAMENU FLOW CHART AND MENU OPERATIONS RECORDING SETTINGMAIN FEATURES Setting-up environmentACCESSORIES Hard disk protectionThe hard disk and cooling fan are consumables For important recordingsPART NAMES Front panel1 2 3 4 7 8 H G KL O P SPART NAMES 1 2 3 47 8 H G KL O P S 9 F I J N M R QPART NAMES Rear panelF G H I J K L Connecting high image quality S-VHS video equipment Connecting to an AmplifierCONNECTIONS Basic connections DSR-3016P modelCONNECTIONS Digital series connectionsSystem control connections A When using the RS485 RJ-11 connectorExternal alarm sensor setup Using as a monitor board during a motion sensor alarmConnecting a remote control circuit SENSOR ALARM OUT connectorBUILT-IN HARD DISK Hard diskC Archive area 1% B Alarm recording area B Alarm recording areaWhen recording with an 80-GB hard disk at 100% capacity BUILT-IN HARD DISKWhen recording with a 160-GB hard disk at 100% capacity Operating display Insert the power cord into a wall outlet and turn on the powerBUILT-IN HARD DISK 0000VIEWING CAMERA IMAGES Viewing a single-screen imageSetting the camera image to single-screen display Pausing imagesVIEWING CAMERA IMAGES Example To zoom in on the camera 2 image and move the zoom frameViewing multiple-screen images VIEWING CAMERA IMAGESViewing images as 9-screen or 16-screen displays Viewing images as a 4-screen displayViewing automatically switching images Automatically switching of the single-screen imagesVIEWING CAMERA IMAGES Example To display images from camera 2 in the plus screenAutomatically switching of the plus screen image Automatically switching of the 4-screen imagesVIEWING CAMERA IMAGES Using two monitors for monitoring Displaying single-screen alarm images on monitorCanceling monitor 2 display Changing monitor 2 from single-screen display to automatic switchingRECORDING IMAGES IN THE NORMAL RECORDING AREA Normal recordingRECORDING IMAGES IN THE NORMAL RECORDING AREA Timer recording2 Set the timer RECORDING IMAGES IN THE ALARM RECORDING AREA Alarm recordingRECORDING IMAGES IN THE ALARM RECORDING AREA Pre-alarm recordingPLAYING BACK RECORDED IMAGES Playback operationsNormal recording area b Skipping to the previous or next alarm When playing back recordings for the first timePlayback in a single screen PLAYING BACK RECORDED IMAGESFast forward/fast rewind and reverse playback PLAYING BACK RECORDED IMAGES Zooming the image during playbackViewing still images Frame advance forward/reversePlaying back multiple-screen displays PLAYING BACK RECORDED IMAGESPlaying back images as 9-screen or 16-screen displays Playing back images as a 4-screen displaySEARCHING FOR RECORDED IMAGES Single-screen displayAlarm search SEARCHING FOR RECORDED IMAGESAlarm search SEARCHING FOR RECORDED IMAGES Alarm thumbnail searchTime/date search SEARCHING FOR RECORDED IMAGES Archive area searchMotion detection search SEARCHING FOR RECORDED IMAGES1 2 3 SEARCHING FOR RECORDED IMAGES Examples of recording area selection6 Turn the shuttle dial clockwise 7 Turn the shuttle dial clockwiseSEARCHING FOR RECORDED IMAGES 8 Turn the shuttle dial clockwise9 Turn the shuttle dial clockwise 10Use the jog dial to move the cursor to PREVIEWSAVING COPYING RECORDED IMAGES SAVING COPYING RECORDED IMAGES A Copying images to the hard disk archive areaSAVING COPYING RECORDED IMAGES InsertingCompactFlash recording area Formatting CompactFlash cardsSAVING COPYING RECORDED IMAGES COMPACT FLASHConnecting to a drive SAVING COPYING RECORDED IMAGESBacking up to a DDS DAT drive Inserting an SCSI card sold separatelySAVING COPYING RECORDED IMAGES Reading data from a DDS DAT drive into theDeleting DDS DAT drive image data archive areaSAVING COPYING RECORDED IMAGES Copying images to a CD-R driveMENU FLOW CHART AND MENU OPERATIONS Menu Flow ChartPOWER FAILURE/USED TIME menu See page Menu setting save menu See pageMENU FLOW CHART AND MENU OPERATIONS Basic menu screen operationsOperations while a sub-menu screen is displayed Entering numbersSetting the language INITIAL SET MENUA LANGUAGE/CLOCK SET menu Main menuCLOCK SET settings Setting summer timeINITIAL SET MENU ONLST-SUNEXT. CLOCK SET setting B TIMER settingsINITIAL SET MENU CLOCK SET ININITIAL SET MENU Operable functions during the period set by the timerExample 1 Set TIME PERIOD A and TIME PERIOD B time zones as follows C HOLIDAY SET setting Example 2 Set the timer operation as followsTo set TIME PERIOD B timer zones for the motion sensor INITIAL SET MENUAutomatic camera detection INITIAL SET MENURECORDING SETTING TIMER SET menuALARM REC MODE SET menu ALARM OPERATION SET menuRECORDING SETTING Resetting each recording areaA RECORDING AREA SET menu TOTAL CAPACITY displayB RECORDING CONDITIONS SET menu AREA FULL RESET settingRECORDING SETTING RECORDING SETTING NORMAL REC MODE SET setting C NORMAL REC MODE SET menuRECORDING SETTING Relationship between RECORDING AREA SET and OVERWRITED PROGRAM REC SET menu RECORDING SETTINGE TIMER SET menu TIMER SET setting0830 ---- OFF 0830 18-- OFFTimer reservations spanning more than 24 hours MON 1030 ---- OFFDLY 0830 1830 OFF 12.50FPS OFF 1030WED **** 2030 OFF 16.67FPS OFF 2030RECORDING SETTING 2030ALARM REC MODE SET menu ALARM REC MODE SET settingRECORDING SETTING Sub-menuEXIT/OSD RECORDING SETTINGONLY A SW1 RECORDING SETTINGB ONLY Pre-alarm recording setting RECORDING SETTINGAlarm trigger setting RECORDING SETTING1 Use the jog dial to move the cursor to the ALARM TRIGGER setting Display examples Alarm recording trigger settingsRECORDING SETTING Using the timer function for recordingChanges the settings for recording double alarms Allows alarm recording images to be displayed on monitorRECORDING SETTING Type of alarmExternal alarm detection Motion sensor alarm detectionAlarm display settings RECORDING SETTINGRECORDING SETTING MOTION SENSOR settingEXIT Setting the alarm duration 01 T-2 LEVELOFF MODE AMODE A 01 T-2 LEVEL2Resetting an alarm RECORDING SETTINGALARM DURATION SET 025SGENERAL SETTING Sets titles Changes the video loss settingsChanges the color level settings Changes the security lock settingsGENERAL SETTING DISPLAY SET settingTitle setting A DISPLAY SET menuVIDEO LOSS SET setting Color level settingsB BUZZER SET setting GENERAL SETTINGC SECURITY LOCK SET setting ADMINOperating privileges and security lock GENERAL SETTINGUSER GENERAL SETTINGUser password setting Example To set the password to “AB123456” Recording and playback operating privilege settingD RS-232C/RS-485 SET SETTING RS-232C/RS-485 SET setting RS-232C SelectionGENERAL SETTING Security lock settingE HDD SET setting RS-485 SelectionHard disk initialization GENERAL SETTINGF NETWORK SET SETTING Network connection Adding a hard diskGENERAL SETTING HDD INITIALIZINGNETWORK SET setting GENERAL SETTINGLAN CARD LAN1PASSWORD SET setting A111GENERAL SETTING Example Set AB123456 as the ID1 passwordSCREEN SETTING A Split screen display position setting See pageB Automatic switching time setting See page Using the timer function for automatic switching See pageSCREEN SETTING A MULTI SCREEN settingSCREEN SETTING B SEQUENCE settingMULTI 16 POSITION SET MENU SCREEN SETTING Example 2 To set the automatic switching period for the main monitorSCREEN SETTING C MASK settings SCREEN SETTINGSCREEN SETTING T-1T-3 1600 T-2 1200POWER FAILURE/USED TIME DISPLAY 2 RECOVER5 POWER Main menuSAVING MENU SETTING DETAILS Saving to a CompactFlash cardLoading saved menu settings SAVING MENU SETTING DETAILSIf copying the recording area settings With PRE ALARM Without PRE ALARMPROGRAM REC RECORDING RATE INTERFACE SPECIFICATIONS RS485 termination switch settings RS485 TERMINATE Termination settingRS-232C Data formatINTERFACE SPECIFICATIONS Command TableSPECIFICATIONS Dimensions mmFRONT 349 SIDE 364.5Printed on recycled paper Gedruckt auf recyceltem Papier Imprimé sur du papier recyclé Impreso en papel recicladoStampato su carta riciclata 1AC6P1P2521-A