Sanyo DSR-3009P instruction manual Main Features, Setting-up environment

MAIN FEATURES

This digital video recorder can be used to store images recorded by a monitoring camera onto its built-in hard disk.

This digital video recorder can display images that are being recorded by a camera in a split-screen (16, 9, 4), and it can also display images that have already been recorded in a split-screen.

The DSR-3009P model split-screen display is capable of 4-screen or 9-screen displays only.

•Equipped with a large-capacity 3.5-inch hard disk drive allowing recording and playback from the built-in hard disk

•Playback can be carried out at the same time as recording.

•Alarm recording tracks movements of suspicious individuals.

•Timer recording lets you record different sessions each day.

•Pre-alarm recording records the images immediately before an alarm.

•Audio recording and playback are also possible.

•Recorded images can be copied using CompactFlash cards.

•Includes a variety of search functions.

☞Alarm searching using an alarm event list or thumbnail alarm images

☞Time and date searches based on recording date and time

☞Motion sensor detecting by searching for the movement of a suspicious individual

•A zoom function allows images being monitored and played back to be enlarged for display.

•The image quality mode can be selected from five modes.

•High-speed switching for each field at maximum speed

•Single-screen, 4-screen, 9-screen and 16-screen display, camera images and video playback images can be displayed in the lower-right corner of the screen, and automatic switching is also possible.

•A single-screen can be displayed during spot monitoring and the alarm screen can be displayed when an alarm occurs.

•Timer setting allows the following settings to be made for each camera.

☞The monitor mask function allows images from selected cameras to be covered by gray patterns during certain time periods.

☞Automatic switching of camera images selected by timer period

☞Setting of automatic screen switching speed for each camera for four different daily time zones.

•A monitor masking function hides the images for specified cameras with gray patterns so that they cannot be monitored.

•Motion sensor detection is possible for each camera. Moving objects can be given recording priority and alarm operation is possible.

•If a signal loss is detected, the monitor screen image can be replaced by a test pattern or a still image, even if the camera image has been lost as a result of the interruption.

•Two levels of security lock are available.

•A PC card-type network card (recommended) can be used to carry out network control.

•Includes an RS-232C interface for computer control.

•Connection to a system controller (sold separately) is possible using an RS-485 interface.

•A PC card-type SCSI card can be used for backups to DDS (DAT) drives.

•A PC card-type SCSI card can be used to copy data to YAMAHA CD-R drives.

•Equipped with MONITOR OUT 2 and S-Video signal input and output connectors.

•Connection to digital equipment such as a digital video recorder (sold separately) is possible using digital connectors.

Setting-up environment

Leave a space of at least 5 cm between the digital video recorder and other nearby objects.

Ventilation holes are located at both sides and on the base of the digital video recorder. Do not allow these ventilation holes to be covered when setting up the recorder.

Furthermore, avoid using the digital video recorder in places with poor ventilation.

English 3