Sanyo DSR-3009P instruction manual General Setting

GENERAL SETTING

Main menu		A
<MAIN MENU>
1.INITIAL SET	->
2.RECORD SET	->
3.GENERAL SET	->
4.SCREEN SET	->
5.POWER FAILURE/USED TIME	->
6.COPY MENU SETTINGS	->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
		B
<GENERAL SET>
1.DISPLAY SET	->
2.BUZZER SET	->
3.SECURITY LOCK SET	->
4.RS-232C/RS-485 SET	->
5.HDD SET	->

DISPLAY SET menu

	<DISPLAY SET>
	DATE	:	ON
	TIME	:	ON
	QUALITY	:	ON
	AUDIO	:	ON
	ALARM COUNT	:	ON
	ALARM TYPE	:	ON
	TITLE	:	ON
@	TITLE SET	->
	VIDEO LOSS	:	TEST
	COLOR LEVEL	:	AUTO
BUZZER SET menu

<BUZZER SET>

ALARM	: ON
DISK FULL	: ON
DISK ERROR	: ON
LOCK WARNING	: ON
KEY IN	: OFF
NON REC	: OFF

Displays settings such as the date and time and the image quality on the monitor.

In addition, the number of alarms and types of alarm can also be displayed.

Sets titles.

Changes the video loss settings.

Changes the color level settings.

These settings relate to buzzer operation. A buzzer can be made to sound when an alarm is detected or a hard disk problem occurs.

6.NETWORK SET	->	C
MOVE LINES WITH JOG, SELECT WITH SHUTTLE

SECURITY LOCK SET menu
<SECURITY LOCK SET>			Changes the security lock settings.
LEVEL PASSWORD(4-8)			USE
ADMIN	--------		OFF
USER	--------		OFF
REC CONTROL	:	USER

D

RS232C/RS-485 SET menu
<RS-232C/RS-485 SET>
CONTROL	:	RS-232C
DATA SPEED	:	19200
STATUS INFO	:	¤¤¤
ALARM INFO	:	¤¤¤
ADDRESS	:	¤¤¤

Selects the control method.

Changes the data speed setting.

Settings for RS-485 only

•Allows status information to be transmitted.

•Allows alarm information to be transmitted.

•Changes address settings.

E

F

HDD SET menu			Initializes the hard disk.
	<HDD SET>		Sets mirror recording.
DISK1	:	80GB
DISK2	:	---GB
DISK INITIALIZE		->
CAUTION : ALL RECORDING WILL BE ERASED!			Sets the hard disk to use for playback

MIRRORING	:	OFF	when mirroring is being used.
PLAYBACK DRIVE	:	¤¤¤

CAUTION : RECORDING SPEED WILL BE	Changes the network card settings.
LIMITED BY MIRRORING!

NETWORK SET menu					Changes the network operation settings.
<NETWORK SET>					Lets you enter an IP address.
LAN CARD	:	LAN1
NETWORK CONTROL :		ON (DISPLAY: ON)
IP ADDRESS	:	192.168.	0.	1	Lets you enter a subnet mask.
SUBNET MASK	:	255.255.255.		0
GATEWAY	:	0. 0.	0.	0
PORT	:	00080			Lets you enter a gateway.
ID	:	PASSWORD (4-8)
ID1	:	1111----
ID2	:	2222----
ID3	:	3333----			Sets the port.

Lets you set three levels of user passwords.

70 English