Sanyo DSR-3009P C SECURITY LOCK SET setting, Operating privileges and security lock, Admin

GENERAL SETTING

5 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

CSECURITY LOCK SET setting

Passwords for this digital video recorder can be set by the Administrator or the User or both. Setting passwords enables privileges to be set for recording and playback operations. After the security lock has been set, if someone other than the password setter touches an operating button on the digital video recorder, the buzzer will sound and a password must be entered. Therefore, be sure to make a note of the password.

Operating privileges and security lock

☞Administrator password setting

Example: To set the password to “123456AB”

MENU	<SECURITY LOCK SET>
	LEVEL PASSWORD(4-8)		USE
	ADMIN	--------	OFF
	USER	--------	OFF
	REC CONTROL	:	ADMIN

1 Press the MENU button to select GENERAL SET, and then turn the shuttle dial clockwise.

The GENERAL SET sub-menu appears, and the cursor is positioned at DISPLAY SET.

2 Use the jog dial to move the cursor to SECURITY LOCK SET, and then turn the shuttle dial clockwise.

The SECURITY LOCK SET sub-menu appears, and the cursor moves to ADMIN.

Note:

•“LEVEL PASSWORD (4-8) USE” is a title and cannot be changed.

•If ADMIN is set to “OFF”, the user password cannot be set.

•The password can consist of between four and eight alphanumeric characters.

3 Turn the shuttle dial clockwise.

The first password entry bar flashes.

ADMIN -------- OFF

4 Use the jog dial to display “1” , and then turn the shuttle dial.

The second password entry bar flashes.

•The characters that can be used in the password are: 0, 1, ...

9, A, B, C, ... Z

Note: This can also be set using the numeric keys. (See page 43.)

ADMIN 1------- OFF

5 Use the jog dial to display “2” , and then turn the shuttle dial.

The third password entry bar flashes.

ADMIN 11------ OFF

6 Repeat this procedure to continue entering “3456AB” , and then turn the shuttle dial clockwise.

The cursor moves to “OFF” and flashes.

7 Use the jog dial to change the setting to “ON” , and then turn the shuttle dial clockwise.

The cursor moves to USER.

<SECURITY LOCK SET>

LEVEL PASSWORD(4-8)		USE
ADMIN	--------	ON
USER	--------	OFF
REC CONTROL	:	ADMIN

8 Set User password.

Carry out ☞ User password setting. If the User setting is not to be done, this is complete.

Use the jog dial to move the cursor to REC CONTROL and carry out the recording and playback operating privilege setting. (See page 74.)

Note: If setting a 4-character password, leave the 5th character as "-" and then turn the shuttle dial clockwise.

English 73