Sanyo DSR-3009P VIDEO LOSS SET setting, Color level settings, B BUZZER SET setting, Disk Full

GENERAL SETTING

3 Use the jog dial to enter “H” , and then turn the shuttle dial clockwise.

The cursor will move to the right. Repeat the above procedure to enter the title “HALL-1F”.

CAMERA NO.03 H------- 03 CAMERA NO.03 HALL-1F-03

Note: To change the title, turn the shuttle dial clockwise so that the cursor moves to the character to be changed, and then re-enter the character.

Note: The following characters can be used in titles.

•Alphabetic characters: A – Z

•Numerals: 0 – 9

•Symbols: -, :, ., /, *, [space]

4 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

VIDEO LOSS SET setting

Use the jog dial to move the cursor to VIDEO LOSS, and then turn the shuttle dial clockwise.

“FREEZE” flashes. If the camera images are lost when this setting is active, “VIDEO LOSS !” appears on the screen and the images are paused.

Display examples:

•OFF: When a video loss occurs, a blank screen is displayed.

•FREEZE: When a video loss occurs, the image that was being displayed immediately before it occurred is displayed.

•TEST: When a video loss occurs, the test pattern is displayed.

Color level settings

1 Use the jog dial to move the cursor to COLOR LEVEL, and then turn the shuttle dial clockwise.

“AUTO” will flash.

2 Use the jog dial to select a setting (example: AUTO), and then turn the shuttle dial clockwise.

Display examples:

•AUTO: The color level is adjusted automatically.

•1 – 10: The color level can be adjusted manually in 10 steps.

BBUZZER SET setting

The buzzer can be made to sound as a warning during an alarm and when the hard disk becomes full.

MENU	<BUZZER SET>
	ALARM	: ON
	DISK FULL	: ON
	DISK ERROR	: ON
	LOCK WARNING	: ON
	KEY IN	: OFF
	NON REC	: OFF

1 Press the MENU button to select GENERAL SET, and then turn the shuttle dial clockwise.

The GENERAL SET sub-menu appears, and the cursor is positioned at DISPLAY SET.

2 Use the jog dial to move the cursor to BUZZER SET, and then turn the shuttle dial clockwise.

The BUZZER SET sub-menu appears, and the cursor moves to

ALARM.

3 Turn the shuttle dial clockwise.

“OFF” flashes. Use the jog dial to change the setting to “ON” or “OFF”.

•ON: The buzzer will sound when an alarm is triggered.

4 If necessary, follow the same procedure to change the buzzer setting (ON/OFF).

•DISK FULL (ON): Sets whether the buzzer sounds when disk overwriting is off and the hard disk is nearly full.

•DISK ERROR (ON): Sets whether the buzzer sounds when there is a hard disk error.

•LOCK WARNING (ON): When the security lock is engaged and a locked button is pressed, the buzzer sounds.

Note: When an item is set to “ON”, the buzzer sounds twice at an interval of about 0.5 seconds.

•KEY IN (ON): Sets the buzzer to sound each time an operating button is pressed.

•NON REC (ON): Sets the buzzer to sound when recording stops by itself and when another person deliberately stops recording.

72 English