Sanyo DSR-3009P instruction manual Motion detection search, Motion Detection Search screen appears

SEARCHING FOR RECORDED IMAGES

2 Use the jog dial to select ARCHIVE AREA SEARCH and then turn the shuttle dial clockwise.

The ARCHIVE AREA SEARCH screen appears.

1NO: The archive number is displayed.

2DATE: The date of the recorded image is displayed.

3TIME: The start time of the recorded image is displayed.

4CH: The channel (camera number) for the stored images appears.

5TOTAL: The total capacity of the archive area is displayed.

6USED: The recorded part of the archive area is displayed.

<SEARCH>
ALARM SEARCH	->
ALARM THUMBNAIL SEARCH	->
TIME/DATE SEARCH	->
ARCHIVE AREA SEARCH	->
MOTION DETECTION SEARCH	->

1 2 3 4								5
									6
			<ARCHIVE	AREA SEARCH>
NO	DATE		TIME CH			CAPACITY
0011	13-12		11:13 01			TOTAL	-	1024MB
0012	13-12		11:15 01			USED	-	400MB
0013	13-12		15:19 01
0014	15-12		10:13 01
0015	16-12		16:13 01			SEARCHING
0016	16-12		11:13 01
0017	19-12		14:23 01
0018	20-12		05:37 01
		MOVE:JOG			SELECT:SHUTTLE

3 Use the jog dial to move the cursor in order to select the images to be played back.

The selected alarm image appears in the preview screen.

		<ARCHIVE AREA SEARCH>
NO	DATE	TIME CH		CAPACITY
0011	13-12	11:13 01		TOTAL	-	1024MB
0012	13-12	11:15 01		USED	-	400MB
0013	13-12	15:19 01
0014	15-12	10:13 01
0015	16-12	16:13 01		SEARCHING
0016	16-12	11:13 01
0017	19-12	14:23 01
0018	20-12	05:37 01
	MOVE:JOG		SELECT:SHUTTLE

Note:

•Up to eight items of information can be displayed in the ARCHIVE AREA SEARCH screen.

When the jog dial is turned, the previous or next archive screen appears.

•To end this search mode, press the SEARCH button.

Motion detection search

When a motion sensor is set for images recorded in the normal recording area (normal recording and timer recording images) or for images recorded in the alarm recording area of the hard disk, you can search for images that have changed because of the entry of a suspicious person, for instance, and play back only those images.

Note: Specify the camera number (channel) to detect only the images from that camera.

1 Press the SEARCH button during recording or when the digital video recorder is stopped.

The SEARCH screen appears.

SEARCH		<SEARCH>
	ALARM SEARCH		->
	ALARM THUMBNAIL SEARCH		->
	TIME/DATE SEARCH		->
	ARCHIVE AREA SEARCH		->
	MOTION DETECTION SEARCH		->
	MOVE:JOG	SELECT:SHUTTLE

2 Use the jog dial to select MOTION DETECTION SEARCH and then turn the shuttle dial clockwise.

The MOTION DETECTION SEARCH screen appears.

	<SEARCH>
ALARM SEARCH		->
ALARM THUMBNAIL SEARCH		->
TIME/DATE SEARCH		->
ARCHIVE AREA SEARCH		->
MOTION DETECTION SEARCH		->
MOVE:JOG	SELECT:SHUTTLE

3 Use the jog dial to select SEARCH FROM and then turn the shuttle dial clockwise.

The ALARM display flashes.

<MOTION	DETECTION SEARCH>
SEARCH FROM	:	ALARM
START	:	-------- --:--
END	:	-------- --:--
CHANNEL	:	--
START PREVIEW		->
MOVE:JOG		SELECT:SHUTTLE

4 Turn the shuttle dial clockwise.

The selected image appears in a single-screen display and playback starts.

		01
ALARM 0004	EN	18-11-02 25:03:12

Note: You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback.

32 English