Accessories, Hard disk protection | Sanyo DSR-3009P manual

ACCESSORIES
Power cord	Fixer power cord tie
Ferrite core x 3

Hard disk protection

If any hard disk format errors are found when the power is turned on, the whole hard disk is checked automatically. If any further problems are found with the hard disk, the POWER indicator flashes. Please contact the place of purchase if you need to reformat the hard disk or make backups of any images. The hard disk is very sensitive to dust, vibration and shocks, and it should not be used in places near sources of magnetic fields. Be sure to observe the following points in order to prevent any loss of data.

•Do not subject the digital video recorder to shocks.

•Do not use the digital video recorder in places where it will be subjected to vibration or places which are unstable.

•

•

•

•

Do not disconnect the power cord while recording or playback is in progress.

Do not use in places which are subject to rapid changes in temperature (changes of around 10°C in an hour).

If the digital video recorder is moved to a place with a large difference in temperature or a high level of humidity, condensation may form. If the digital video recorder is used with condensation inside it, operating problems may occur. Do not install the digital video recorder in places which are constantly vibrating, such as vehicles or trains.

The hard disk and cooling fan are consumables.

•These parts should generally be replaced after 2 years of use (for the hard disk) or 3 years of use (for the cooling fan) at normal temperatures of 25°C. These periods of time are intended as guides only, and are not a guarantee of product performance.

For important recordings

•

•

•

Always check whether a recording has been recorded properly.

In case a recording was not recorded properly with this because of faulty connections with other equipment or a correct playback is not possible, any claims for compensation will be declined.

For important recordings, it is recommended to make a periodical backup copy for protection against loss from any malfunction or accident.

4

English

Image 5

Sanyo DSR-3009P Accessories, Hard disk protection, Hard disk and cooling fan are consumables, For important recordings

Contents

Deutsch D English GBFrançais F Español E Avoiding Electrical Shock and Fire PrecautionLocation Contents Setting-up environment Main Features Power cord Fixer power cord tie Ferrite core x AccessoriesHard disk protection Hard disk and cooling fan are consumables Front panel Part Names Part Names Rear panel Connecting to an Amplifier Connecting high image quality S-VHS video equipmentConnections Basic connections DSR-3016P model Connections When using the RS485 RJ-11 connectorDigital series connections System control connections Using as a monitor board during a motion sensor alarm External alarm sensor setupConnecting a remote control circuit Sensor Alarm OUT connector Hard disk BUILT-IN Hard Disk Basic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Pausing images Setting the camera image to single-screen displayViewing Camera Images Viewing a single-screen image Press camera select button 2 once more Viewing Camera ImagesPress camera select button Viewing images as 9-screen or 16-screen displays Viewing multiple-screen imagesViewing images as a 4-screen display Plus screen viewing Example To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the plus screen image Automatically switching of the 4-screen images Displaying single-screen alarm images on monitor Using two monitors for monitoringCanceling monitor 2 display Operating monitor Normal recording Recording Images Normal Recording Area Set the timer Timer recordingTimer recording stops when the set end time is reached Press the Timer button Alarm recording Recording Images in the Alarm Recording AreaSet alarm recording Suspicious person detection Set pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Searching for Recorded Images Alarm search SeeArchive area Preview display Press an Alarm button during playback Alarm searchSearching for Recorded Images Turn the shuttle dial clockwise Last nine alarm recording images recorded appear Alarm thumbnail searchAlarm number of the currently-selected alarm image flashes Time/date search Example To search for 8 pm on 26 October Archive area search Motion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Copying images to the hard disk archive area Saving Copying Recorded ImagesCopy screen appears Archive Area display flashes Cursor moves to Pictures Formatting CompactFlash cards CompactFlash recording areaShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003 InstalledRemoved Connecting to a drive Backing up to a DDS DAT driveInserting an Scsi card sold separately Model No. Super Store dat 24e Listing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart Menu Flow Chart and Menu Operations Basic menu screen operations Menu Flow Chart and Menu OperationsOperations while a sub-menu screen is displayed Entering numbers LANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time Timer settings EXT. Clock SET setting To change camera images into automatic switching screens Operable functions during the period set By the timerTo detect an alarm input in a camera image To hide camera images with a gray pattern Example To set 17 November as a holiday Holiday SET setting Initial SET sub-menu appears, and the cursor moves to Automatic camera detection Recording Setting Resetting each recording area Recording SettingRecording Area SET menu Total Capacity display Follow the same procedure to make the setting for Area Full Reset settingAlarm Recording Area Recording Conditions SET menu Cursor moves to Total Number Follow the same procedure to make the setting OFF forCursor moves to Overwrite On flashes Relationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting Program REC SET menu Repeat the above procedure to set cameras 5 to 16 to OFF1P-1 Select Individual Camera Rate FPS Timer SET setting Timer SET menu Flashes in the FPS column Timer reservations spanning more than 24 hoursOFF flashes in the SET column Cursor moves to MON 12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line Alarm REC Mode SET setting Alarm REC Mode SET menuSelects the recording method for alarm images = 30721 Alarms can be Recorded = 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings Alarm canceled Alarm images Alarm images are recorded Canceled AlternatelyCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarm Cursor moves to the 2SEC setting for Duration and flashes Pre-alarm recording settingCursor moves to Alarm Trigger OFF flashes Display examples Alarm recording trigger settings Alarm trigger setting Set the alarm duration for each camera Using the timer function for recording Displayed and SA sensor alarm will External alarm detectionSignal loss detection alarm Sensor built into this unit an intruder Cursor moves to Alarm Priority Alarm display settingsCursor moves to MON.2 Display Cursor moves to Retrigger Exit Motion Sensor setting 11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Alarm will then be canceled Resetting an alarmAlarm images will appear in a single-screen display Seconds General Setting Display SET setting General SettingTitle setting Display SET menu Color level settings Video Loss SET settingBuzzer SET setting Auto will flash Operating privileges and security lock Security Lock SET settingSet User password Password is entered at the password entry All operations are locked. When the userCarried out. When the Administrator password Administrator password is entered, all Security lock setting RS-232C/RS-485 SET settingCanceling the security lock RS-232C Selection This completes the setting and the cursor moves to Control HDD SET settingRS-485 Selection Hard disk initialization Inserting the recommended LAN card Adding a hard diskNetwork connection Network SET sub-menu appears, and the cursor moves to Network SET settingCursor moves to Network Control Cursor moves to IP Address Computer operation Password SET settingExample Set AB123456 as the ID1 password Main menu Screen Setting Multi Screen setting Screen SettingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD button Normal flashes Sequence settingChanges to 16 and 16 changes to 1S flashes English Cursor moves to Sequence SET 1S flashesSequence SET sub-menu appears Individual Interval SET sub-menu appears Cursor moves to Main Monitor SET Set both Timer a and Timer B 00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Cursor moves to Mask SET Example of mask display when timer is set About the sub-menu Power FAILURE/USED Time Display Save menu settings onto a CompactFlash card Saving Menu Setting DetailsLoad menu settings from CompactFlash card Saving to a CompactFlash card If copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings With PRE Alarm Without PRE Alarm Interface Specifications Command Table Interface Specifications Dimensions mm Specifications