Sanyo DSR-3009P Searching for Recorded Images, Alarm search, Turn the shuttle dial clockwise

SEARCHING FOR RECORDED IMAGES

Alarm search

All alarm recording images in the alarm recording area can be searched for and played back. If pre-alarm images have is recorded, the images immediately before the alarms can also be played back.

1 Press the SEARCH button during recording or when the digital video recorder is stopped.

The SEARCH screen appears.

SEARCH		<SEARCH>
	ALARM SEARCH		->
	ALARM THUMBNAIL SEARCH		->
	TIME/DATE SEARCH		->
	ARCHIVE AREA SEARCH		->
	MOTION DETECTION SEARCH		->
	MOVE:JOG	SELECT:SHUTTLE

2 Use the jog dial to select ALARM SEARCH and then turn the shuttle dial clockwise.

The ALARM SEARCH screen appears.

1NO: Alarm number appears.

2DATE/TIME: The date and time that the alarm was received and the images were recorded appears.

3CH: The channel (camera number) which received the alarm appears.

4TOTAL ALARMS: The total number of alarm images recorded appears.

1	2				3	4
				<ALARM SEARCH>
NO	DATE		TIME		CH		TOTAL ALARMS
0108	20-12		11:13 16			00234
0107	19-12		11:15 10
0106	16-12		15:19 06
0105	16-12		10:13 01
0104	15-12		16:13 03				SEARCHING
0103	13-12		11:13 12
0102	13-12		14:23 10
0101	13-12		05:37 04
		MOVE:JOG				SELECT:SHUTTLE

3 Use the jog dial to move the cursor in order to select the images to be played back.

The selected alarm image appears in the preview screen.

		<ALARM SEARCH>
NO	DATE	TIME CH		TOTAL ALARMS
0108	20-12	11:13 16	00234
0107	19-12	11:15 10
0106	16-12	15:19 06
0105	16-12	10:13 01
0104	15-12	16:13 03		SEARCHING
0103	13-12	11:13 12
0102	13-12	14:23 10
0101	13-12	05:37 04
	MOVE:JOG		SELECT:SHUTTLE

4 Turn the shuttle dial clockwise.

The preview image appears in a single-screen display and playback starts.

		01
ALARM 0004	EN	18-11-02 25:03:12

Note:

•You can also use the shuttle dial or jog dial to carry out operations such as pausing and fast-forward playback.

•To listen to the sound, change to either a 4-screen or 16-screen (9-screen) split-screen display.

•Alarm search starts playback from the image that was recorded at the instant the alarm occurred, so if you are viewing pre-alarm images, use the shuttle operations to carry out rewind playback.

•Alarm search only plays back alarm images for a single event. When playback of the event is complete, playback stops. If you would like to play back the next alarm, press an ALARM button.

Alarm search 2

1 Press an ALARM button during playback.

•If you press the ûbutton, playback skips to the previous alarm image.

•If you press the ùbutton, playback skips to the next alarm image.

ALARM		01
	ALARM 0004	EN 18-11-02 25:03:12

Note: When playing back images using alarm search, the playback will pause at the start and at the end of each alarm recording. Use the ALARM buttons to play back previous and subsequent alarm recordings.

Note:

•

•

Up to eight items of alarm information can be displayed on the ALARM SEARCH screen. When the jog dial is turned, the previous or next alarm information screen appears.

To end this search mode, press the SEARCH button.

English 29