OFF setting for Program flashes | Sanyo DSR-3009P guide

RECORDING SETTING

7 Use the jog dial to change from “– –” to “20” , and then turn the shuttle dial clockwise.

“– –” (minutes) flashes in the STOP column.

8 Use the jog dial to change from “– –” to “30” , and then turn the shuttle dial clockwise.

The “OFF” setting for PROGRAM flashes.

WED

**:** 20:30

OFF

25FPS

OFF

9 Use the jog dial to change the setting to “OFF” , and then turn the shuttle dial clockwise.

“25” flashes in the FPS column.

WED

**:** 20:30

OFF

25FPS

OFF

10Use the jog dial to set the recording cycle to “16.67” , and then turn the shuttle dial clockwise.

“OFF” flashes in the SET column.

WED : 20:30 OFF 16.67FPS OFF

11Use the jog dial to change from “OFF” to “ON” , and then turn the shuttle dial clockwise.

The cursor moves to the first line.

MON	10:30	:	***	****FPS	***
WED	:	20:30	OFF	16.67FPS	ON

12Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

English

Page 59

Image 59

Sanyo DSR-3009P OFF setting for Program flashes, Cursor moves to the first line, 12Press the EXIT/OSD button

Contents

Español E English GBDeutsch D Français F Avoiding Electrical Shock and Fire PrecautionLocation Contents Setting-up environment Main Features Hard disk and cooling fan are consumables AccessoriesPower cord Fixer power cord tie Ferrite core x Hard disk protection Front panel Part Names Part Names Rear panel Basic connections DSR-3016P model Connecting high image quality S-VHS video equipmentConnecting to an Amplifier Connections System control connections When using the RS485 RJ-11 connectorConnections Digital series connections Sensor Alarm OUT connector External alarm sensor setupUsing as a monitor board during a motion sensor alarm Connecting a remote control circuit Hard disk BUILT-IN Hard Disk Basic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Viewing a single-screen image Setting the camera image to single-screen displayPausing images Viewing Camera Images Press camera select button 2 once more Viewing Camera ImagesPress camera select button Plus screen viewing Viewing multiple-screen imagesViewing images as 9-screen or 16-screen displays Viewing images as a 4-screen display Example To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the plus screen image Automatically switching of the 4-screen images Operating monitor Using two monitors for monitoringDisplaying single-screen alarm images on monitor Canceling monitor 2 display Normal recording Recording Images Normal Recording Area Press the Timer button Timer recordingSet the timer Timer recording stops when the set end time is reached Suspicious person detection Recording Images in the Alarm Recording AreaAlarm recording Set alarm recording Set pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Preview display Alarm search SeeSearching for Recorded Images Archive area Turn the shuttle dial clockwise Alarm searchPress an Alarm button during playback Searching for Recorded Images Time/date search Alarm thumbnail searchLast nine alarm recording images recorded appear Alarm number of the currently-selected alarm image flashes Example To search for 8 pm on 26 October Archive area search Motion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Archive Area display flashes Saving Copying Recorded ImagesCopying images to the hard disk archive area Copy screen appears Cursor moves to Pictures Sanyo IMG00001 IMG00002 IMG00003 CompactFlash recording areaFormatting CompactFlash cards Shuttle dial clockwise Model No. Super Store dat 24e Connecting to a drive Backing up to a DDS DAT driveInstalledRemoved Inserting an Scsi card sold separately Listing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart Menu Flow Chart and Menu Operations Entering numbers Menu Flow Chart and Menu OperationsBasic menu screen operations Operations while a sub-menu screen is displayed LANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time Timer settings EXT. Clock SET setting To hide camera images with a gray pattern Operable functions during the period set By the timerTo change camera images into automatic switching screens To detect an alarm input in a camera image Example To set 17 November as a holiday Holiday SET setting Initial SET sub-menu appears, and the cursor moves to Automatic camera detection Recording Setting Total Capacity display Recording SettingResetting each recording area Recording Area SET menu Recording Conditions SET menu Area Full Reset settingFollow the same procedure to make the setting for Alarm Recording Area On flashes Follow the same procedure to make the setting OFF forCursor moves to Total Number Cursor moves to Overwrite Relationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting Select Individual Camera Rate FPS Repeat the above procedure to set cameras 5 to 16 to OFFProgram REC SET menu 1P-1 Timer SET setting Timer SET menu Cursor moves to MON Timer reservations spanning more than 24 hoursFlashes in the FPS column OFF flashes in the SET column 12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line = 30721 Alarms can be Recorded Alarm REC Mode SET menuAlarm REC Mode SET setting Selects the recording method for alarm images = 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings When 2 or more alarms occur Camera 4 alarm Alarm images Alarm images are recorded Canceled AlternatelyAlarm canceled Camera 2 alarm canceled OFF flashes Pre-alarm recording settingCursor moves to the 2SEC setting for Duration and flashes Cursor moves to Alarm Trigger Display examples Alarm recording trigger settings Alarm trigger setting Set the alarm duration for each camera Using the timer function for recording Sensor built into this unit an intruder External alarm detectionDisplayed and SA sensor alarm will Signal loss detection alarm Cursor moves to Retrigger Alarm display settingsCursor moves to Alarm Priority Cursor moves to MON.2 Display Exit Motion Sensor setting 11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Seconds Resetting an alarmAlarm will then be canceled Alarm images will appear in a single-screen display General Setting Display SET menu General SettingDisplay SET setting Title setting Auto will flash Video Loss SET settingColor level settings Buzzer SET setting Operating privileges and security lock Security Lock SET settingSet User password Administrator password is entered, all All operations are locked. When the userPassword is entered at the password entry Carried out. When the Administrator password RS-232C Selection RS-232C/RS-485 SET settingSecurity lock setting Canceling the security lock Hard disk initialization HDD SET settingThis completes the setting and the cursor moves to Control RS-485 Selection Inserting the recommended LAN card Adding a hard diskNetwork connection Cursor moves to IP Address Network SET settingNetwork SET sub-menu appears, and the cursor moves to Cursor moves to Network Control Computer operation Password SET settingExample Set AB123456 as the ID1 password Main menu Screen Setting Display examples Press the EXIT/OSD button Screen SettingMulti Screen setting Repeat steps 4 and 5 above to set 11 and 16 to 1S flashes English Sequence settingNormal flashes Changes to 16 and 16 changes to Individual Interval SET sub-menu appears 1S flashesCursor moves to Sequence SET Sequence SET sub-menu appears Cursor moves to Main Monitor SET Set both Timer a and Timer B 00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Cursor moves to Mask SET Example of mask display when timer is set About the sub-menu Power FAILURE/USED Time Display Saving to a CompactFlash card Saving Menu Setting DetailsSave menu settings onto a CompactFlash card Load menu settings from CompactFlash card If copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings With PRE Alarm Without PRE Alarm Interface Specifications Command Table Interface Specifications Dimensions mm Specifications

Sanyo DSR-3009P instruction manual OFF setting for Program flashes, Cursor moves to the first line

Models: DSR-3009P

RECORDING SETTING

The “OFF” setting for PROGRAM flashes.

OFF

25FPS

“25” flashes in the FPS column.

OFF

“OFF” flashes in the SET column.

WED : 20:30 OFF 16.67FPS OFF

The cursor moves to the first line.

OFF

12Press the EXIT/OSD button.

The display returns to the normal screen.

RECORDING SETTING

The “OFF” setting for PROGRAM flashes.

OFF

25FPS

“25” flashes in the FPS column.

OFF

“OFF” flashes in the SET column.

WED **:** 20:30 OFF 16.67FPS OFF

The cursor moves to the first line.

OFF

12Press the EXIT/OSD button.

The display returns to the normal screen.

WED : 20:30 OFF 16.67FPS OFF