Mask settings, 15Press the EXIT/OSD button | Sanyo DSR-3009P

SCREEN SETTING

12Use the jog dial to set T-2, and then turn the shuttle dial clockwise.

Repeat this procedure to switch between T-1, T-2, T-3 and T-4.

<MAIN MONITOR SET>

T-1

<MAIN MONITOR SET>

T-2

<MAIN MONITOR SET>

T-3

13Use the jog dial to move the cursor to 09, and then turn the shuttle dial clockwise.

“ON” flashes.

14Use the jog dial to set “OFF” , and then turn the shuttle dial clockwise.

Repeat the above procedure to set cameras 10 (10) through to 16 (16) to “OFF”.

<MAIN MONITOR SET>
	T-1
IN	IN	IN	IN
01:ON	02:ON	03:ON	04:ON
05:ON	06:ON	07:ON	08:ON
09:OFF	10:OFF	11:OFF	12:OFF
13:OFF	14:OFF	15:OFF	16:OFF

Note: Repeat steps 10 to 12 to set T-3 and T-4 as required.

15Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

T-1	T-2
(6 00 - 12 00)	(12 00 - 16 00)

T-3	T-4
(16 00 - 24 00)	(24 00 - 6 00)

Note:

•Repeat the above procedure to make the settings for monitor 2.

•For a 4-screen display, the timer function cannot be used for automatic switching of screen images.

CMASK settings

If you do not need camera images to be displayed on the monitor screen, you can hide the images for individual cameras with a gray pattern.

The DSR-3009P model can display only cameras 01 to 09.

Example 1: To prevent certain camera images from being monitored for the period of time set by the timer (TIMER A, B)

	<MASK SET>
	T-1
IN	IN	IN	IN
01:OFF	02:OFF	03:OFF	04:OFF
05:OFF	06:OFF	07:OFF	08:OFF
09:OFF	10:OFF	11:OFF	12:OFF
13:OFF	14:OFF	15:OFF	16:OFF

1 Set the timer setting for both TIMER A and TIMER B in the TIME PERIOD SET menu. (See page 46.)

Set both TIMER A and TIMER B.

<TIME PERIOD SET>
TIME PERIOD	T1	T2	T3	T4
TIME PERIOD A	00:00	00:00	00:00	00:00
TIME PERIOD B	00:00	00:00	00:00	00:00
SELECT TIME PERIOD
SEQUENCE	TIME PERIOD		A
MASK	TIME PERIOD		A
MOTION SENSOR	TIME PERIOD		A

English

85

Image 86

Sanyo DSR-3009P instruction manual Mask settings, 15Press the EXIT/OSD button, 00 12 12 00 16 16 00 24 24 00 6

Contents

Français F English GBDeutsch D Español E Avoiding Electrical Shock and Fire PrecautionLocation Contents Main Features Setting-up environment Hard disk protection AccessoriesPower cord Fixer power cord tie Ferrite core x Hard disk and cooling fan are consumables Part Names Front panel Part Names Rear panel Connections Connecting high image quality S-VHS video equipmentConnecting to an Amplifier Basic connections DSR-3016P model Digital series connections When using the RS485 RJ-11 connectorConnections System control connections Connecting a remote control circuit External alarm sensor setupUsing as a monitor board during a motion sensor alarm Sensor Alarm OUT connector BUILT-IN Hard Disk Hard disk Basic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Viewing Camera Images Setting the camera image to single-screen displayPausing images Viewing a single-screen image Press camera select button 2 once more Viewing Camera ImagesPress camera select button Viewing images as a 4-screen display Viewing multiple-screen imagesViewing images as 9-screen or 16-screen displays Plus screen viewing Example To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the 4-screen images Automatically switching of the plus screen image Canceling monitor 2 display Using two monitors for monitoringDisplaying single-screen alarm images on monitor Operating monitor Recording Images Normal Recording Area Normal recording Timer recording stops when the set end time is reached Timer recordingSet the timer Press the Timer button Set alarm recording Recording Images in the Alarm Recording AreaAlarm recording Suspicious person detection Set pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Archive area Alarm search SeeSearching for Recorded Images Preview display Searching for Recorded Images Alarm searchPress an Alarm button during playback Turn the shuttle dial clockwise Alarm number of the currently-selected alarm image flashes Alarm thumbnail searchLast nine alarm recording images recorded appear Time/date search Archive area search Example To search for 8 pm on 26 October Motion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Copy screen appears Saving Copying Recorded ImagesCopying images to the hard disk archive area Archive Area display flashes Cursor moves to Pictures Shuttle dial clockwise CompactFlash recording areaFormatting CompactFlash cards Sanyo IMG00001 IMG00002 IMG00003 Inserting an Scsi card sold separately Connecting to a drive Backing up to a DDS DAT driveInstalledRemoved Model No. Super Store dat 24e Listing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart and Menu Operations Menu Flow Chart Operations while a sub-menu screen is displayed Menu Flow Chart and Menu OperationsBasic menu screen operations Entering numbers LANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time EXT. Clock SET setting Timer settings To detect an alarm input in a camera image Operable functions during the period set By the timerTo change camera images into automatic switching screens To hide camera images with a gray pattern Holiday SET setting Example To set 17 November as a holiday Automatic camera detection Initial SET sub-menu appears, and the cursor moves to Recording Setting Recording Area SET menu Recording SettingResetting each recording area Total Capacity display Alarm Recording Area Area Full Reset settingFollow the same procedure to make the setting for Recording Conditions SET menu Cursor moves to Overwrite Follow the same procedure to make the setting OFF forCursor moves to Total Number On flashes Relationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting 1P-1 Repeat the above procedure to set cameras 5 to 16 to OFFProgram REC SET menu Select Individual Camera Rate FPS Timer SET menu Timer SET setting OFF flashes in the SET column Timer reservations spanning more than 24 hoursFlashes in the FPS column Cursor moves to MON 12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line Selects the recording method for alarm images Alarm REC Mode SET menuAlarm REC Mode SET setting = 30721 Alarms can be Recorded = 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings Camera 2 alarm canceled Alarm images Alarm images are recorded Canceled AlternatelyAlarm canceled When 2 or more alarms occur Camera 4 alarm Cursor moves to Alarm Trigger Pre-alarm recording settingCursor moves to the 2SEC setting for Duration and flashes OFF flashes Alarm trigger setting Display examples Alarm recording trigger settings Using the timer function for recording Set the alarm duration for each camera Signal loss detection alarm External alarm detectionDisplayed and SA sensor alarm will Sensor built into this unit an intruder Cursor moves to MON.2 Display Alarm display settingsCursor moves to Alarm Priority Cursor moves to Retrigger Motion Sensor setting Exit 11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Alarm images will appear in a single-screen display Resetting an alarmAlarm will then be canceled Seconds General Setting Title setting General SettingDisplay SET setting Display SET menu Buzzer SET setting Video Loss SET settingColor level settings Auto will flash Operating privileges and security lock Security Lock SET settingSet User password Carried out. When the Administrator password All operations are locked. When the userPassword is entered at the password entry Administrator password is entered, all Canceling the security lock RS-232C/RS-485 SET settingSecurity lock setting RS-232C Selection RS-485 Selection HDD SET settingThis completes the setting and the cursor moves to Control Hard disk initialization Inserting the recommended LAN card Adding a hard diskNetwork connection Cursor moves to Network Control Network SET settingNetwork SET sub-menu appears, and the cursor moves to Cursor moves to IP Address Computer operation Password SET settingExample Set AB123456 as the ID1 password Screen Setting Main menu Repeat steps 4 and 5 above to set 11 and 16 to Screen SettingMulti Screen setting Display examples Press the EXIT/OSD button Changes to 16 and 16 changes to Sequence settingNormal flashes 1S flashes English Sequence SET sub-menu appears 1S flashesCursor moves to Sequence SET Individual Interval SET sub-menu appears Set both Timer a and Timer B Cursor moves to Main Monitor SET 00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Example of mask display when timer is set Cursor moves to Mask SET Power FAILURE/USED Time Display About the sub-menu Load menu settings from CompactFlash card Saving Menu Setting DetailsSave menu settings onto a CompactFlash card Saving to a CompactFlash card If copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings Without PRE Alarm With PRE Alarm Interface Specifications Interface Specifications Command Table Specifications Dimensions mm