Sanyo DSR-3009P instruction manual Set both Timer a and Timer B, Cursor moves to Main Monitor SET

SCREEN SETTING

9 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

Example 3: To set a 5-second interval for the automatic switching of main monitor images and to prevent automatic switching from occurring when it is not required, such as when using the timer function.

	<MAIN MONITOR SET>
		T-1
IN	IN	IN	IN
01:ON	02:ON	03:ON	04:ON
05:ON	06:ON	07:ON	08:ON
09:ON	10:ON	11:ON	12:ON
13:ON	14:ON	15:ON	16:ON

1 Set the timer setting for both TIMER A and TIMER B in the TIME PERIOD SET menu. (See page 46.)

Set both TIMER A and TIMER B.

<TIME PERIOD SET>
TIME PERIOD	T1	T2	T3	T4
TIME PERIOD A	00:00	00:00	00:00	00:00
TIME PERIOD B	00:00	00:00	00:00	00:00
SELECT TIME PERIOD
SEQUENCE	TIME PERIOD		A
MASK	TIME PERIOD		A
MOTION SENSOR	TIME PERIOD		A

2 Use the jog dial to move the cursor to SEQUENCE, and then turn the shuttle dial clockwise.

“1S” flashes.

<SCREEN SET>
1.MULTI SCREEN	:	NORMAL
MULTI SCREEN SET		->
2.SEQUENCE	:		1S
SEQUENCE SET				->
3.MASK	:	OFF
MASK SET		->

3 Use the jog dial to change the SEQUENCE setting to “INDIV.” , and then turn the shuttle dial clockwise.

The cursor moves to SEQUENCE SET.

4 Turn the shuttle dial clockwise.

The SEQUENCE SET sub-menu appears.

<SEQUENCE SET>
MAIN MONITOR	:	1S
MAIN MONITOR SET		->
MON.2	:	1S
MON.2 SET		->
QUAD	:	1S
INDIVIDUAL INTERVAL	SET	->

5 Turn the jog dial to select MAIN MONITOR, and then turn the shuttle dial clockwise.

“1S” flashes.

6 Use the jog dial to set “5S” , and then turn the shuttle dial clockwise.

The cursor moves to MAIN MONITOR SET.

Display examples:

•1 – 30S: Sets the automatic switching time for the main monitor.

•INDIV. : Select when setting individual switching times for each camera for the main monitor.

7 Turn the shuttle dial clockwise.

The MAIN MONITOR SET sub-menu will be displayed. This sub-menu screen is used to select whether the images from cameras 1 to 16 are displayed or not displayed for the time set by the timer setting (T-1).

8 Turn the shuttle dial clockwise, use the jog dial to select “T-1” , and then turn the shuttle dial clockwise.

The cursor moves to 01.

9 Use the jog dial to move the cursor to CAMERA 1 (01), and then turn the shuttle dial clockwise.

“ON” flashes.

10Use the jog dial to set “OFF” , and then turn the shuttle dial clockwise.

Repeat the above procedure to set cameras 2 (02) through to 8 (08) to “OFF”.

<MAIN MONITOR SET>
	T-1
IN	IN	IN	IN
01:OFF	02:OFF	03:OFF	04:OFF
05:OFF	06:OFF	07:OFF	08:OFF
09:ON	10:ON	11:ON	12:ON
13:ON	14:ON	15:ON	16:ON

11Use the jog dial to move the cursor to T-1, and then turn the shuttle dial clockwise.

84 English