JVC GR-DV3000 specifications 34 EN, Self-Timer

34 EN ADVANCED FEATURES

Power Switch

SNAPSHOT

Button

Lock Button

Recording Start/Stop Button

Display

Menu Screen

SEL F – T I MER – OF F

ON

Self-Timer indication

Self-Timer

Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.

•You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self- recording with the viewfinder pushed back.

2 Press the MENU wheel in. The Menu Screen appears.

3 Rotate the MENU wheel to select “ MANUAL”, and press it.

4 Rotate the MENU wheel to select “SELF-TIMER”, and press it. The Sub Menu appears. Rotate the MENU wheel to select “ON ”, and press it. Selection is complete. Rotate the MENU wheel to

select “ RETURN”, and press it twice to close the Menu Screen.

5 To engage the Self-Timer for video recording, press the Recording Start/Stop Button. After 15 seconds, the beep sounds and video recording starts. To stop Self-Timer recording, press the Recording Start/Stop Button again. The camcorder re-enters Record-Standby mode.

OR

Press SNAPSHOT. After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder re-enters Record-Standby mode.

6 To end Self-Timer recording, select “OFF” in step 4.

NOTE:

If “BEEP” and “TALLY” are set to “OFF” ( pg. 30), the beep does not sound and the tally lamp does not light.

MENU Wheel

When the Recording Start/Stop Button or SNAPSHOT is pressed, the tally lamp changes as shown:

			4Turns off
					(Self-Timer snapshot recording starts)
Begins blinking	4Blinks quickly			4 Stops blinking and stays on
(Self-Timer starts)	(Self-Timer shooting				(Self-Timer video recording starts)
	starts soon)	4

After approx. 15 sec.