36
EN
IMPORTANT
Some Fade/Wipe Effects cannot be used with certain
modes of Program AE with special effects (墌 pg. 38,
39). If an unusable Fade/Wipe Effect is selected, its
indicator blinks or goes out.
Recording Start/
Stop Button
MENU Wheel
Power Switch
Fade/Wipe Effects
These effects let you make pro-style scene transi-
tions. Use them to spice up the transition from one
scene to the next.
Fade or Wipe works when tape recording is started
or when you stop recording.
1Set the VIDEO/MEMORY Switch to “VIDEO” and
set the Power Switch to “ ” while pressing down the
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2Press the MENU wheel in. The Menu Screen
appears.
3Rotate the MENU wheel to select “ FADER/
WIPE”, then press it. Rotate the MENU wheel to
select the desired function, then press it. Selection is
complete.
4Press the MENU wheel in again. The Menu
Screen closes.
5To activate the Fade-in or Wipe-in . . .
.....Press FADE/WIPE during Record-Standby mode
so that the selected effect indicator appears.
To activate the Fade-out or Wipe-out . . .
.....Press FADE/WIPE during recording so that the
selected effect indicator appears.
6Press the Recording Start/Stop Button to activate
the Fade-in/out or Wipe-in/out.
NOTES:
●You can extend the length of a Fade or Wipe by
pressing and holding the Recording Start/Stop Button.
●The sound at the end of the last recorded scene is not
stored.
To Deactivate The Selected Effect . . .
.....press FADE/WIPE again in step 6 so that the
effect indicator disappears.
FADE/WIPE Button
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
ADVANCED FEATURES
(cont.)