32
EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
DE. . NAVI L
SKCHBLAN R
COPY
STEREO–
SOUND
1
SP
OFF
OFF
–
–
–
–
–
NRETUR
O.O
RE NEON SC LCD/TV
UAOT
IMETDATE/
TI ME CODE
–
–
–FFO
NRETUR
BEEP MELODY
NO
TALLY
–
–
DEMO MODE –NO
NA GAT IONVI –FFO
TITL W/ –AECKGRNDB
SOUN I N –IDCMAUX/
E-CLP R –
4
IEC
0X1762
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUNDMODE
MODE
MODE
12
BIT
SYNC ROH
REC
IN UTPS/AV
DE . LNAV . I
SCHRBLA KN
END
COPY
For Playback Menu
The following procedure applies to all except Synchro
Comp (墌 pg. 70).
1Set the VIDEO/MEMORY Switch to “VIDEO”, then
set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2Press the MENU wheel in. The Menu Screen
appears.
3Rotate the MENU wheel to select the desired
function menu, and press it. The selected function
menu appears.
4Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6Rotate the MENU wheel to select “ RETURN”
and press it twice to close the Menu Screen.
Display
Power Switch
MENU Wheel
Lock Button
Recording Start/Stop Button
NOTES:
●The date indication can also be turned on/off by
pressing DISPLAY on the remote control (provided).
●“REC MODE” can be set when the Power Switch is set
to “” or “ ” (墌 pg. 15, 29).
●When “S/AV INPUT” is set to “ON”, camcorder playback
cannot be viewed on the AV output.
Menu Screen Explanations
墌 pg. 33.
墌 pg. 33.
墌 pg. 70.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(墌 pg. 15).
It is recommended you use
“REC MODE” in the “
VIDEO” Menu when using this
camcorder as a recorder during
dubbing (墌 pg. 59, 60).
Helps find a blank portion of tape
when you want to record from
the middle of a tape (
墌
pg. 44).
IMAGE: Enables dubbing of
images recorded on a tape to a
memory card (
墌
pg. 61).
OFF: Enables snapshots to be
taken during tape playback.
NAVIGATION:
Enables thumbnail
images to be made manually
during tape playback (墌 pg. 43).
墌 pg. 43.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (墌 pg. 59).
OFF: Enables audio/video
signal output to a TV, VCR, etc.
via the AV and S-VIDEO
connectors (墌 pg. 54, 58).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
BLANK SRCH
COPY
NAVI.DEL.
S/AV INPUT
VIDEO/MEMORY Switch
SYSTEM
DISPLAY
Each setting is linked with “ DISPLAY” or
“ SYSTEM”, which appears when the
Power Switch is set to “” (墌 pg. 30, 31).
The parameters are the same as in the
description on pg. 30, 31.
VIDEO
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)