56
EN
Connection To A Personal Computer
This camcorder can transfer still images to a PC via
DV or USB connection as shown in the illustration.
1Make sure the camcorder and PC are turned off.
2Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3If you are using the USB connection, set the
VIDEO/MEMORY switch to “MEMORY”.
•Only the still images stored on the memory card can
be transferred to a PC.
4Turn the camcorder’s Power Switch to “ ”
while pressing down the Lock Button located on the
switch and turn on the PC.
•Refer to the instruction manual of the software on
how to transfer a still image to the PC.
•If the PC connected to the camcorder via the USB
cable is not powered on, the camcorder does not
enter the USB mode.
5When finished, turn off the PC first, then the
camcorder.
NOTES:
●In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one
or more core filter. If a cable has only one core filter, the
end that is closest to the filter should be connected to
the camcorder.
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (墌 pg. 9).
●Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
●The date/time information cannot be captured into the
PC.
●Refer to the instruction manuals of the PC and provided
Software.
●The still images can also be transferred to a PC with a
DV connector-equipped capture board.
●When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
on the PC, or use the DV cable provided with the
capture board.
●The system may not work properly depending on the
PC or capture board you are using.
To DV
IN/OUT
To USB
connector
DV cable
(optional)
To DV
connector
USB cable
(provided)
To
USB
Power Switch
PC with DV connector USB-equipped PC
Core filter
Core filter OR
“ACCESSING FILES” appears on the LCD
monitor while the PC is accessing data in the
camcorder or the camcorder is transferring a file
to the PC. Never disconnect the USB cable
while “ACCESSING FILES” is displayed on the
LCD monitor since this can result in product
damage.
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)