JVC GR-DV3000 specifications 76 EN

76 EN			TROUBLESHOOTING (cont.)
*	SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
	During R.A.Edit, the Picture • The last selected editing scene is		• Select Picture Wipe or Dissolve
	Wipe and Dissolve	ending.	before beginning editing. The
	functions do not work.	• At the end of the last selected	effects are then automatically
		scene for editing, the Power switch	activated ( pg. 68).
		was set to “OFF”.	• Do not turn off the camcorder’s
		• The power is off.	power after setting Edit-In and Edit-
			Out points, as they will all be
			erased ( pg. 68).
			• The camcorder automatically shuts
			off after 5 minutes have elapsed in
			the Pause mode. Make sure you
			continue operations within 5
			minutes after engaging Pause
			mode ( pg. 68).

(Scene transition does not • When using “Picture Wipe/Dissolve”

)go as expected.	( pg. 68), there is a delay of a
	fraction of a second between the
	previous record stop-point and the
	Dissolve start-point. This is normal,	————
	but this slight delay becomes
	especially noticeable when
	shooting fast-moving subject or
	during rapid panning.
White Balance cannot be	• The Sepia or Monotone mode is	• Turn off Sepia or Monotone before
qactivated.	activated.	setting White Balance ( pg. 39,
		41).
When shooting a subject	• This is a result of exceedingly high
illuminated by bright light,	contrast, and is not a malfunction.	————
wvertical lines appear.
When the screen is under	• This is not a malfunction.
direct sunlight during
shooting, the screen		————
becomes red or black for an
einstant.
During recording, the date/	• “DATE/TIME” is set to “OFF” in the	• Set “DATE/TIME” to “ON” in the
rtime does not appear.	Menu Screen.	Menu Screen ( pg. 31).
	• Interface Shooting is performed.	• During Interface Shooting, the
		date/time does not appear
		( pg. 19).
Files stored on the memory	• Files stored on the memory card	• Remove protection from the files
card cannot be deleted.	are protected.	stored on the memory card and
		delete them ( pg. 49, 50).