JVC GR-DV3000 specifications Wide Mode Manual Wind CUT, System, Cinema, Beep, Melody

30 ENUSING MENUS FOR DETAILED ADJUSTMENT (cont.)

Menu Screen Explanations (cont.)

WIDE

MODE

MANUAL

WIND

CUT

BEEP

	TALLY
SYSTEM	DEMO
	MODE

NOTES:

OFF	Records with no change in the screen ratio. For playback on a TV with a
	normal screen ratio.
CINEMA	Inserts black bands at the top and bottom of the screen. During playback on
	wide-screen TVs, the black bands at the top and bottom of the screen are cut
	and the screen ratio becomes 16:9.	appears. When using this mode, refer
	to your wide-screen TV’s instruction manual. During playback/recording on 4:3
	TVs/LCD monitor/viewfinder, black bands are inserted at the top and bottom of
	the screen and the image appears like a letterboxed 16:9 movie.
	• “CINEMA” mode is effective only when the VIDEO/MEMORY Switch is set to
	“VIDEO” ( pg. 14).

SQUEEZE For playback on TVs with an aspect ratio of 16:9. Naturally expands the image
	to fit the screen without distortion.	appears. When using this mode, refer to
	your wide-screen TV’s instruction manual. During playback/recording on 4:3
	TVs/LCD monitor/viewfinder, the image is elongated vertically.

•“SQUEEZE” mode is effective only when the VIDEO/MEMORY Switch is set to “VIDEO” ( pg. 14).

D.WIDE	“	” appears. The zoom range is extended beyond the maximum optical zoom
	wide angle range. This mode’s wide angle setting is equivalent to using a 0.7X
	wide conversion lens. Zooming is possible from 0.7X to 10X. This mode is
	suitable for shooting in a small room.
	• “D.WIDE” mode is effective only when the VIDEO/MEMORY Switch is set to
	“VIDEO” ( pg. 14).
OFF	Disengages the function which cuts down on noise created by wind.
ON	Helps cut down on noise created by wind. “		” appears. The quality of the
	sound will change. This is normal.
OFF	Even though not heard while shooting, shutter sound is recorded on the tape.
BEEP	The beep sounds when the power is turned on or off, and at the beginning and end
	of recording. Also to activate the shutter sound effect ( pg. 20, 21).
MELODY	Instead of a beep, a melody sounds when any operation is performed. It also
	activates the shutter sound effect ( pg. 20, 21).
OFF	The tally lamp remains off at all times.
ON	The tally lamp comes on to signal the start of recording.
OFF	Automatic demonstration will not take place.
ON	Demonstrates certain functions such as Program AE with special effects, etc.,
	and can be used to confirm how these functions operate.
	Demonstration starts in the following cases:

•When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

•With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “ ” or “ ”.

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

●If a tape is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.

: Factory-preset

●The “ MANUAL” settings are effective only when the Power Switch is set to “ ”.

●“ SYSTEM” functions which are set when the Power Switch is set to “ ” are also applied when the Power Switch

is set to “ ” ( pg. 32).