EN
55
1Make sure all units are turned off.
2Connect the camcorder to a TV or VCR as shown
in the illustration ( pg. 54).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3Connect the VCR output to the TV input, referring
to your VCRs instruction manual.
4Turn on the camcorder, the VCR and the TV.
5Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
Date/Time
.....set DATE/TIME to AUTO, ON or OFF in
the Menu Screen ( pg. 32).
Or, press DISPLAY on the remote control to
turn on/off the date indication.
Time Code
.....set TIME CODE to ON or OFF in the Menu
Screen ( pg. 32).
Playback Sound Mode, Tape Speed And Tape
Running Displays for tape playback
.....set ON SCREEN to LCD or LCD/TV in the
Menu Screen ( pg. 32).
NOTES:
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack ( pg. 9).
To monitor the picture and sound from the camcorder
without inserting a tape or memory card, set the
camcorders Power Switch to or “ ”, then set
your TV to the appropriate input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound when
the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
If no image is displayed or no sound is heard from the
TV, set S/AV INPUT to OFF in the Menu Screen
( pg. 32).
When a cable is connected to the AV or PHONE
connector, the sound is not heard from the speaker.