EN
57

Using The Camcorder As A WebCam

This camcorder can be used as a WebCam via USB
connection.
1Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2Connect the camcorder to your PC using the USB
cable.
3Set the VIDEO/MEMORY Switch to MEMORY
and set the Power Switch to “ ” or “ ”, then turn
on the PC.
•“Web CAMERA appears on the screen.
If the PC is not powered on, the camcorder does not
enter the Web Camera mode.
4 When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
In order to maintain optimum performance of the
camcorder, provided cables may be equipped with one
or more core filter. If a cable has only one core filter, the
end that is closest to the filter should be connected to
the camcorder.
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack ( pg. 9).
Use the provided software PIXELA ImageMixer to
capture video in real-time.
You can also use the camcorder for webconference by
using Windows® Microsoft Netmeeting and signing up
for Microsoft Hotmail.
In the Web Camera mode, the following buttons cannot
be operated: TITLE, E-MAIL, SNAPSHOT, the
Recording Start/Stop button.
b CAMERAeW bCAMERAeW
P
C
To USB
connector
USB cable
(provided)
To USB
Power Switch
USB-equipped PC
VIDEO/MEMORY Switch
(Open the LCD monitor
to access this switch.)
Display
Refer to the instruction manuals of the PC and
provided Software.