64
EN
Press TNormal playback
Left or SLOW
Rewind Button
To move image,
press (Right)
while keeping
SHIFT held down.
PAUSE
PLAY
Zoom Buttons
SHIFT
Right or SLOW
Forward Button
Up Button
Down Button
STOP
FEATURE:
Slow-Motion Playback
PURPOSE:
To allow slow-speed search in either direction
during tape playback.
OPERATION:
1)To change from normal to Slow-Motion
Playback, press SLOW (
9
or
0
) more than
approx. 2 seconds. After approx. 5 minutes
(approx. 20 seconds with an 80-minute
cassette) in Slow Rewind or approx. 5 minutes
in Slow Forward, normal playback resumes.
To stop Slow-Motion Playback, press PLAY (
4
).
NOTES:
●You can also engage Slow-Motion Playback from
Still Playback by pressing SLOW more than approx.
2 seconds.
●During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
●After SLOW (
9
or
0
) is pressed and held, the still
image may be displayed for a few seconds, followed
by a blue screen for a few seconds. This is not a
malfunction.
●There may be a small margin between the slow-
motion playback start point you chose and the
actual start point for Slow-Motion Playback.
●During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.
●During Slow-Motion Playback, press PAUSE (6) to
pause playback.

FEATURE: Frame-By-Frame Playback

PURPOSE:
To allow frame-by-frame search during tape
playback.
OPERATION:
1)To change from normal to Frame-By-Frame
Playback, press SLOW (
0
) repeatedly for
forward or SLOW (
9
) repeatedly for reverse.
Each time it is pressed, the frame is played back.
NOTE:
You can also engage Frame-By-Frame Playback from
Still Playback by pressing SLOW (
9
or
0
) repeatedly.

FEATURE: Playback Zoom

PURPOSE:
To magnify the recorded image up to 30X at any time during playback.
OPERATION:
1)Press PLAY (
4
) to find the scene of interest.
2)Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3)You can move the image on screen around to find a particular portion of the picture. While holding down
SHIFT, press (Left), (Right), (Up) and (Down).
To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press
PLAY (
4
).
NOTES:
●Zoom can also be used during slow-motion and still playback.
●Due to digital image processing, the quality of the image may suffer.
Remote sensor
USING THE REMOTE CONTROL UNIT
(cont.)