Password SET setting, Computer operation | Sanyo DSR-3009P manual

GENERAL SETTING

PASSWORD SET setting

For network connection there are three access levels, each of which has a password. Each password can consist of a combination of 4 to 8 alphanumeric symbols.

Note: The cursor cannot be moved to ID or PASSWORD (4-8).

<NETWORK SET>
LAN CARD	:	LAN1
NETWORK CONTROL :		ON (DISPLAY: ON)
IP ADDRESS	:	192.168.	0.	1
SUBNET MASK	:	255.255.255.		0
GATEWAY	:	0. 0.	0.	0
PORT	:	00080
ID	:	PASSWORD (4-8)
ID1	:	1111----
ID2	:	2222----
ID3	:	3333----

Example: Set AB123456 as the ID1 password.

1 Use the jog dial to move the cursor to ID1, and then turn the shuttle dial clockwise.

The initial digit 1 of the password entry flashes.

•The characters that can be used in the password are: 0, 1 ...

9, A, B ... Z

Note:

•ID1: This level can only observe a live image through the network.

•ID2: This level can observe a live image and play back and search recorded images through the network.

•ID3: This level allows all digital video recorder operations and settings to be carried out.

2 Use the jog dial to display “A” , and then turn the shuttle dial.

The second digit 1 flashes.

ID1	: A111----

3 Use the jog dial to display “B” , and then turn the shuttle dial.

The third digit 1 flashes.

ID1	: AB11----

4 Repeat this procedure to continue entering “123456” , and then turn the shuttle dial clockwise.

The cursor moves to ID2.

PORT		:	00080
	ID	:	PASSWORD (4-8)
	ID1	:	AB123456
	ID2	:	2222----
	ID3	:	3333----

5 As required, use the same procedure to set passwords for ID2 and ID3, and then turn the shuttle dial clockwise.

The cursor moves to LAN CARD.

6 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

7 Computer operation

Refer to the separate Manual for Remote Operation by Network Connection.

English

79

Image 80

Sanyo DSR-3009P instruction manual Password SET setting, Example Set AB123456 as the ID1 password, Computer operation

Contents

English GB Deutsch DFrançais F Español E Avoiding Electrical Shock and Fire PrecautionLocation Contents Main Features Setting-up environment Accessories Power cord Fixer power cord tie Ferrite core xHard disk protection Hard disk and cooling fan are consumables Part Names Front panel Part Names Rear panel Connecting high image quality S-VHS video equipment Connecting to an AmplifierConnections Basic connections DSR-3016P model When using the RS485 RJ-11 connector ConnectionsDigital series connections System control connections External alarm sensor setup Using as a monitor board during a motion sensor alarmConnecting a remote control circuit Sensor Alarm OUT connector BUILT-IN Hard Disk Hard disk Basic Normal Enhanced Fine Super Fine BUILT-IN Hard DiskRecording Time Operating display Setting the camera image to single-screen display Pausing imagesViewing Camera Images Viewing a single-screen image Press camera select button 2 once more Viewing Camera ImagesPress camera select button Viewing multiple-screen images Viewing images as 9-screen or 16-screen displaysViewing images as a 4-screen display Plus screen viewing Example To display images from camera 2 in the plus screen Viewing automatically switching imagesAutomatically switching of the single-screen images Automatically switching of the 4-screen images Automatically switching of the plus screen image Using two monitors for monitoring Displaying single-screen alarm images on monitorCanceling monitor 2 display Operating monitor Recording Images Normal Recording Area Normal recording Timer recording Set the timerTimer recording stops when the set end time is reached Press the Timer button Recording Images in the Alarm Recording Area Alarm recordingSet alarm recording Suspicious person detection Set pre-alarm recording Recording Images in the Alarm Recording AreaPre-alarm recording Normal playback Playing Back Recorded ImagesPlayback operations Fast forward/fast rewind and reverse playback Playing Back Recorded ImagesPlayback in a single screen Frame advance forward/reverse Zooming the image during playbackViewing still images Playing back images as a 4-screen display Playing back multiple-screen displaysPlaying back images as 9-screen or 16-screen displays Alarm search See Searching for Recorded ImagesArchive area Preview display Alarm search Press an Alarm button during playbackSearching for Recorded Images Turn the shuttle dial clockwise Alarm thumbnail search Last nine alarm recording images recorded appearAlarm number of the currently-selected alarm image flashes Time/date search Archive area search Example To search for 8 pm on 26 October Motion Detection Search screen appears Alarm display flashesMotion detection search Cursor moves to Start Preview Cursor moves to ChannelExamples of recording area selection 10Use the jog dial to move the cursor to Preview Saving Copying Recorded Images Saving Copying Recorded Images Copying images to the hard disk archive areaCopy screen appears Archive Area display flashes Cursor moves to Pictures CompactFlash recording area Formatting CompactFlash cardsShuttle dial clockwise Sanyo IMG00001 IMG00002 IMG00003 Connecting to a drive Backing up to a DDS DAT drive InstalledRemovedInserting an Scsi card sold separately Model No. Super Store dat 24e Listing Data Press Copy to Abort Copying images to a CD-R drive Menu Flow Chart and Menu Operations Menu Flow Chart Menu Flow Chart and Menu Operations Basic menu screen operationsOperations while a sub-menu screen is displayed Entering numbers LANGUAGE/CLOCK SET menu Setting the languageInitial SET Menu Initial SET Menu Clock SET settingsSetting summer time EXT. Clock SET setting Timer settings Operable functions during the period set By the timer To change camera images into automatic switching screensTo detect an alarm input in a camera image To hide camera images with a gray pattern Holiday SET setting Example To set 17 November as a holiday Automatic camera detection Initial SET sub-menu appears, and the cursor moves to Recording Setting Recording Setting Resetting each recording areaRecording Area SET menu Total Capacity display Area Full Reset setting Follow the same procedure to make the setting forAlarm Recording Area Recording Conditions SET menu Follow the same procedure to make the setting OFF for Cursor moves to Total NumberCursor moves to Overwrite On flashes Relationship between Recording Area SET Normal REC Mode SET menuNormal REC Mode SET setting Repeat the above procedure to set cameras 5 to 16 to OFF Program REC SET menu1P-1 Select Individual Camera Rate FPS Timer SET menu Timer SET setting Timer reservations spanning more than 24 hours Flashes in the FPS columnOFF flashes in the SET column Cursor moves to MON 12Press the EXIT/OSD button OFF setting for Program flashesCursor moves to the first line Alarm REC Mode SET menu Alarm REC Mode SET settingSelects the recording method for alarm images = 30721 Alarms can be Recorded = 20480 Alarms can be Recorded = 30200 Alarms can be RecordedDisplay example Alarm recording settings Alarm images Alarm images are recorded Canceled Alternately Alarm canceledCamera 2 alarm canceled When 2 or more alarms occur Camera 4 alarm Pre-alarm recording setting Cursor moves to the 2SEC setting for Duration and flashesCursor moves to Alarm Trigger OFF flashes Alarm trigger setting Display examples Alarm recording trigger settings Using the timer function for recording Set the alarm duration for each camera External alarm detection Displayed and SA sensor alarm willSignal loss detection alarm Sensor built into this unit an intruder Alarm display settings Cursor moves to Alarm PriorityCursor moves to MON.2 Display Cursor moves to Retrigger Motion Sensor setting Exit 11Press the EXIT/OSD button Setting the alarm durationSetting is then complete Resetting an alarm Alarm will then be canceledAlarm images will appear in a single-screen display Seconds General Setting General Setting Display SET settingTitle setting Display SET menu Video Loss SET setting Color level settingsBuzzer SET setting Auto will flash Operating privileges and security lock Security Lock SET settingSet User password All operations are locked. When the user Password is entered at the password entryCarried out. When the Administrator password Administrator password is entered, all RS-232C/RS-485 SET setting Security lock settingCanceling the security lock RS-232C Selection HDD SET setting This completes the setting and the cursor moves to ControlRS-485 Selection Hard disk initialization Inserting the recommended LAN card Adding a hard diskNetwork connection Network SET setting Network SET sub-menu appears, and the cursor moves toCursor moves to Network Control Cursor moves to IP Address Computer operation Password SET settingExample Set AB123456 as the ID1 password Screen Setting Main menu Screen Setting Multi Screen settingRepeat steps 4 and 5 above to set 11 and 16 to Display examples Press the EXIT/OSD button Sequence setting Normal flashesChanges to 16 and 16 changes to 1S flashes English 1S flashes Cursor moves to Sequence SETSequence SET sub-menu appears Individual Interval SET sub-menu appears Set both Timer a and Timer B Cursor moves to Main Monitor SET 00 12 12 00 16 16 00 24 24 00 6 Mask settings15Press the EXIT/OSD button Example of mask display when timer is set Cursor moves to Mask SET Power FAILURE/USED Time Display About the sub-menu Saving Menu Setting Details Save menu settings onto a CompactFlash cardLoad menu settings from CompactFlash card Saving to a CompactFlash card If copying the recording area settings Saving Menu Setting DetailsLoading saved menu settings Without PRE Alarm With PRE Alarm Interface Specifications Interface Specifications Command Table Specifications Dimensions mm