Sanyo DSR-3009P instruction manual Searching For Recorded Images, Turn the shuttle dial clockwise

SEARCHING FOR RECORDED IMAGES

8 Turn the shuttle dial clockwise.

Use the jog dial to set the END date and time (example: 8.00 pm on the current day) for the motion sensor setting, and then turn the shuttle dial clockwise.

The cursor moves to MOTION SENSOR.

28-10-01 10:00 END :

28-10-01 20:00

MOTION SENSOR ->

PREVIEW ->

VIEW ->

MOVE:JOG

SELECT:SHUTTLE

9 Turn the shuttle dial clockwise.

The motion sensor setting screen appears.

Set the motion sensor to cover the area where you would like movement to be observed.

Move the cursor to EXIT and turn the shuttle dial clockwise. The display returns to the MOTION DETECTION SEARCH screen. Refer to page 67 for details on motion sensor settings.

-	-	-		ú	ú		ú	-	-	-	-
-	-	-						-	-	-	-
				ú	ú		ú
-	-	-						-	-	-	-
				ú	ú		ú
-	-	-	-		-	-		-	-	-	-
-	-	-	-		-	-		-	-	-	-
-	-	-	-		-	-		-	-	-	-
		LEVEL : 6						EXIT

10Use the jog dial to move the cursor to PREVIEW.

The screen showing the motion sensor settings appear in the preview screen each time the shuttle dial is turned.

28-10-01 10:00 END :

28-10-01 20:00

MOTION SENSOR ->

PREVIEW ->

VIEW ->

MOVE:JOG

SELECT:SHUTTLE

Note: If no motion sensor settings have been made, “NOT FOUND” appears, so make sure that the motion sensor settings have been made correctly.

11To view a motion sensor setting in a single-screen display, use the jog dial to move the cursor to VIEW and then turn the shuttle dial clockwise.

The display changes from the specified image to normal playback.

Note: If the camera number has been specified as a channel when carrying out motion detector searches, only images for the specified camera number will be played back. Furthermore, the digital video recorder title information and date information may not be fully displayed at this time in some cases. To play back the images from all cameras, the playback has first to be switched off and then switched back on again.

34 English