Sanyo DSR-3009P Recording Setting, Main manu, Recording Area Set, CONDITIONS SET menu

RECORDING SETTING

Main manu		A
<MAIN MENU>
1.INITIAL SET	->
2.RECORD SET	->
3.GENERAL SET	->
4.SCREEN SET	->
5.POWER FAILURE/USED TIME	->
6.COPY MENU SETTINGS	->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE		B
<RECORD SET>
1.RECORDING AREA SET	->
2.RECORDING CONDITIONS SET ->
3.NORMAL REC MODE SET	->	C
4.PROGRAM REC SET	->
5.TIMER SET	->
6.ALARM REC MODE SET	->
7.ALARM OPERATION SET	->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
		D
		E

RECORDING AREA SET
menu				Displays the total	Sets the capacity of the
<RECORDING AREA SET>				capacity of the hard	normal recording area.
				disk.	Normal
TOTAL CAPACITY		:	80GB
NORMAL RECORDING AREA		:	80 %		recording
AREA FULL RESET	->
					area
ALARM RECORDING AREA		:	19 %
AREA FULL RESET	->
ARCHIVE AREA		:	1 %
AREA FULL RESET	->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
RECORDING				Sets the capacity of the	Sets the capacity of the
CONDITIONS SET menu				archive recording area.	alarm recording area.
<RECORDING CONDITIONS SET>				Archive	Alarm
DIGITAL SERIES RECORDING :		OFF
TOTAL NUMBER	:	1		recording	recording
				area	area
NORMAL RECORDING AREA
OVERWRITE	:	OFF		Changes the settings for connections when
ALARM RECORDING AREA
OVERWRITE	:	OFF		more than one (maximum of 2) digital video
REMAINING DISK WARNING :		1 %		recorder is connected together for series
				recording.
NORMAL REC MODE SET				Changes the overwriting setting for the normal
menu				recording area.

		<NORMAL REC MODE SET>						Changes the overwriting setting for the alarm
								recording area.
PICTURE QUALITY					: ENHANCED
AUDIO RECORDING					: OFF
REC RATE			:	25FPS (		18H)
REC RPOGRAM GROUP					: OFF			Changes the warning settings for the remaining
								recording area.
								Changes the image quality settings.
PROGRAM REC SET								Changes the audio recording settings.
menu
		<PROGRAM REC SET>						Changes the recording cycle (recording speed)
								settings.
			P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)								Values in brackets are available recording
01:0.313		02:0.313		03:0.313		04:0.313		times.
05:0.313		06:0.313		07:0.313		08:0.313
09:0.313		10:0.313		11:0.313		12:0.313
13:0.313		14:0.313		15:0.313		16:0.313		Specifies the program numbers for program
			NORMAL REC:		23H
								recording.
			ALARM REC :		01360
								Changes the program recording settings.
TIMER SET menu								Programs no. 1 to no. 4 can be set, and
								recording can then be carried out simply by
			<TIMER SET>					specifying the camera for recording. The
WEEK	START					FPS	SET	recording period can be changed separately for
			STOP	PROGRAM				each camera.
SUN	--:--		--:--	OFF		25FPS	OFF
MON	--:--		--:--	OFF		25FPS	OFF
THE	--:--		--:--	OFF		25FPS	OFF
WED	--:--		--:--	OFF		25FPS	OFF	Changes the timer settings.
THU	--:--		--:--	OFF		25FPS	OFF
FRI	--:--		--:--	OFF		25FPS	OFF	You must always set the timer when carrying
SAT	--:--		--:--	OFF		25FPS	OFF
DLY	--:--		--:--	OFF		25FPS	OFF	out timer recording.

F

ALARM REC MODE SET menu

	<ALARM REC MODE SET>
PICTURE QUALITY			:	ENHANCED
AUDIO RECORDING			:	OFF
ALARM RECORDING			:	OFF
ALARM INTERLEAVE			:	ONLY
PROGRAM GROUP			:	OFF
REC RATE: @		25FPS,		DURATION:	5SEC
PRE-ALARM RECORDING			:	¤¤¤
REC RATE:		**** FPS,		DURATION:	***
=>	(07733 ALARMS CAN BE RECORDED )
ALARM TRIGGER			:	ALARM

Changes the settings for alarm recording and pre-alarm recording.

G

ALARM OPERATION SET menu

<ALARM OPERATION SET>		FULL	Changes the alarm settings for detecting
MAIN MON. DISPLAY	:		suspicious people, and also changes motion
ALARM PRIORITY	:	LAST
MON.2 DISPLAY	:	OFF	sensor settings.
RETRIGGER	:	OFF
MOTION SENSOR		->
ALARM DURATION SET		->

50 English