Adjusting the system parameters
4Press 
/ 
to switch between “MON CHK: YES” and “MON CHK: SKIP”.
ENTER
MON CHK: YES
Setting the DEMO MODE
You can test the sound beam output from this unit to experience the sound beam.
1Repeat steps 1 to 3 in “Using the system parameters” on page 98.
2Set the operation mode selector to YSP.
TV/AV
YSP
3Press 
/ 
so that “DEMO MODE” is displayed in the front panel display.
MON CHK: SKIP
•Select MON CHK: YES to activate the monitor check function.
•Select MON CHK: SKIP to deactivate the monitor check function.
5Press STANDBY/ON on the remote control to set this unit to the standby mode.
STANDBY/ON
ENTER
DEMO MODE
The new setting will be activated when you turn on the power of this unit next time.
Note
If you change the setting of “MONITOR CHECK”, “UP- SCALING” is automatically set to “OFF” (see page 91).
