
•Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit.
Listening position from the unit
Room width
Room length
Choices for the room width and length:
2.0 m to 12.0 m (6.5 ft to 40.0 ft)
Choices for the listening position from this unit: 1.8 m to 9.0 m (6.0 ft to 30.0 ft)
| A)SETTING PARAMETERS 2/3 | ||
|
|
|
|
|
|
| |
Room width and |
|
| |
| [ 5.4m ] |
| |
length |
|
| |
|
| ||
|
|
| |
| [p]/[p]:Up/Down [p]/[p]:Sel | ||
|
| [ENTER]:Return |
MANUAL SETUP
INSTALLED HEIGHT (Installed height of this unit)
Use to adjust the installed height of this unit. Choices: 0.0 m to 3.0 m
Initial setting: 1.0 m
Floor | 0.0 m to 3.0 m |
■BEAM ADJUSTMENT (Beam adjustment)
Use to manually adjust the various sound beam settings. We recommend that you select 5 Beam as the beam mode before adjusting these parameters (see page 60).
Notes
• When INSTALLED POSITION is adjusted in MANUAL |
SETUP (see page 82), the factory default value is automatically |
set for this parameter except Center in FOCAL LENGTH (see |
page 85). |
• Depending on the beam mode settings (see pages 60 and 66), |
some channel positions may not be available for selection. In |
this case, “– |
Listening position from the unit
A)SETTING PARAMETERS 3/3
\ |
[ 2.5m ] |
\ |
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
the beam mode, set the surround left and right signals to be |
output from the front left and right channels. |
B)BEAM ADJUSTMENT
.a)HORIZONTAL ANGLE b)VERTICAL ANGLE
c)BEAM TRAVEL LENGTH d)FOCAL LENGTH e)TREBLE GAIN
[p]/[p]:Up/Down [ENTER]:Enter
OPERATION | ADVANCED |
|
|
Note
When you set the INSTALLED POSITION parameter in MANUAL SETUP (see page 82), the parameters newly set for the width and length of your listening room are automatically set as the factory default value.
English