100 En
Adjusting the system parameters
You can set the maximum volume level so that this unit
will not output sound beyond the limited volume level.
1Repeat steps 1 to 3 in “Using the system
parameters” on page 98.
2Set the operation mode selector to YSP.
“
3Press / so that “MAX VOLUME SET” is
displayed in the front panel display.
4Press ENTER.
5Press / to adjust the maximum volume
level.
Control range: MAX, 99 to 01, MIN
Control step: 1
6Press STANDBY/ON on the remote control to
set this unit to the standby mode.
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
You can set the initial volume level when the power of this
unit is turned on.
1Repeat steps 1 to 3 in “Using the system
parameters” on page98.
2Set the operation mode selector to YSP.
Setting the MAX VOLUME
YSP
TV/AV
ENTER

MAX VOLUME SET

ENTER
Setting the TURN ON VOLUME
ENTER
STANDBY/ON
YSP
TV/AV