Sharp LC-70LE836E Audio settings, Auto volume, Audio adjustment, Surround, Bass enhancer

Basic adjustment

Audio settings

Go to “Menu” > “Setup” > “Audio”.

Menu

CH list	Setup
:Enter	:Back

Audio

STANDARD

Auto volume

[Off]

Treble

Bass

Balance

L30 R30

Audio

Auto volume

Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. This function reduces this problem by equalizing levels.

Item

High	Strongly reduces the volume gaps among
	different sound sources.

Middle

Low	Slightly reduces the volume gaps among
	different sound sources.
Off	Does not adjust the volume gaps.

Audio

Audio adjustment

You can adjust the sound quality to your preference with the following settings.

Item	c(Cursor)	d(Cursor)
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Decrease audio	Decrease audio
	from the right	from the left
	speaker	speaker

Audio

Surround

This function produces a surround effect from the speakers.

Item

	Reproduces a concert hall experience with
3D Hall	realistic live surround sound based on
	reverberant sounds measured in a concert
	hall.
	Reproduces a movie theater experience
3D Movie	with realistic live surround sound based on
	reverberant sounds measured in a movie
	theater.
3D	Creates three-dimensional surround sound
Standard	with detailed control of the signal phase.
Normal	Provides limited surround sound.
Off	Outputs normal sound.

Audio

Bass enhancer

This function allows you to enjoy bass-enhanced sound.

Audio

Clear voice

This function emphasises speech against background noise for greater clarity.

Audio

Audio description setting

This function allows you to enable output of audio description if the TV receives a signal including audio description.

NOTE

•When the “Audio description” is set to “On”, the audio description sound is superimposed on the main audio when you select a broadcast compatible with audio description.

•If you do not clearly hear the sound for the visually impaired, go to “Menu” > “Setup” > “Audio” > “Audio description setting” > “Mix level”, and select the upper level to turn up the volume.

•This function is available only for DTV broadcasts. This “Audio description setting” menu is not displayed for the ATV or the external inputs.

•The audio description sound is superimposed on the main audio only when the sound is output on the speaker sound output, headphone sound output and sound for audio out output. The sound is not output on the S/PDIF sound output and the SCART sound output.

•This function is not available for the AQUOS Audio speaker system.

•This function does not work during time shift playback.

35