23
Timer setup using EPG
You can switch to a programme at a set time.

1Press EPG.

2Press a/b/c/d to select the programme you

want to set, and then press ;.
Back to EPG
Watch No
Programme info.
Next

3Press c/d to select “Watch”, and then press

;.
• If you select “No”, the TV returns to the EPG screen.

4Press c/d to select “Yes”, and then press ;.

• The selected TV programme is marked with an icon.

5Press ; to select “Back”.

Cancelling the timer setup

1Press EPG.

2Press a/b/c/d to select the programme with

timer setup, and then press ;.

3Press c/d to select “Cancel”, and then press

;.

4Press c/d to select “Yes”, and then press ;.

ECancelling using B button on the

remote control unit

1Press EPG.

2Press B to display the timer setup list.

3Press a/b to select the programme you want

to cancel timer setup, and then press ;.

4Press c/d to select “Cancel”, and then press

;.

5Press c/d to select “Yes”, and then press ;.

Teletext

What is teletext?

Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.

Turning teletext on/off

1Select a TV channel or external source providing

a teletext programme.

2Press m to display the teletext.

• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
TELETEXT
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 44).
• Teletext will not work in 3D mode.

Buttons for teletext operations

Buttons Description
:r/s Increase or decrease the page number.
Numeric
buttons 0_9
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
Colour
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
k (Reveal
hidden
teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3 (Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[ (Subtitle
for teletext)
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “e” and “f”.
;
Display the top menu.
• The top menu will not be displayed
when the service does not support
top menus.
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
NOTE
• MHEG may not be displayed properly in 3D mode.
NOTE (836 series only)
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “Menu” > “Setup” > “View setting” >
“Network setup”.
• You cannot view MHEG-5 content when MHEG-
5 content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
Watching TV