5
Preparation

Attaching the stand unit

•
Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.

1Confirm that there are twelve screws (eight long

screws and four short screws) supplied with the
stand unit.

2 1Set the supporting post for the stand unit

onto the polystyrene foam.
2Attach the stand base to the supporting
post.
3Insert and tighten the eight screws into the
eight holes on the bottom of the stand base.
• Hold the stand unit securely with one hand, and
then tighten the screws.
Stand base Long screws
TV front
Supporting post

3Insert the stand into the openings on the bottom

of the TV (hold the stand so it will not drop from
the edge of the base area).
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Soft cushion

4Insert and tighten the four screws into the four

holes on the rear of the TV.
Short screws
NOTE
• To detach the stand unit, perform the steps in reverse
order.
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.