69
3D brightness boost
You can adjust the backlight of the TV for 3D image
viewing.
Item
High The screen brightens
Middle
Low The screen dims
NOTE
• When “High” or “Low” is selected, “OPC”, “Backlight”
and “Range of OPC” are not available.
• The “3D brightness boost” is not available for 2D mode.
• The “3D brightness boost” items can be saved for every
3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)”,
“GAME (3D)”).
3D setup EBasic operation
Go to “Menu” > “Setup” > “Option” > “3D
setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is
detected.
Item
Yes When a 3D signal is detected, the TV
switches to 3D mode automatically.
No Automatic change is not performed.
NOTE
• 3D signals may not be detected depending on the signal
format.
2D s 3D convert effect
You can adjust the 3D effect when converting
images from 2D mode to 3D mode. Select a desired
level of convert effect from e1 to e16.
NOTE
• This function is only available when converting 2D
images to 3D images.
• When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
• 2D images that have been converted to 3D images may
be viewed only for personal use.
3D still image effect setting
Select the method for adjusting the 3D image effect
(depth).
Item
Auto Adjusts the still image effect (depth)
automatically.
Manual For manual adjustment of the still
image effect (depth).
NOTE
• If you select “Manual”, adjust the 3D still image effect
(depth) with “3D still image effect adjustment”.
• This function can be adjusted when viewing 3D still
images in USB media mode.
• Even if you select “Auto”, the 3D still image effect
(depth) may not be correctly adjusted depending on the
3D still image.
• 3D still images taken in macro mode will be displayed
with excessive depth.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
3D still image effect adjustment
You can adjust the 3D still image effect (depth).
Adjust the level from _5 to e10. “0” is the level
where no adjustment is made (factory preset value).
NOTE
• This function can be adjusted when viewing 3D still
images in USB media mode.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
Viewing time info
This function allows you to display the elapsed time
of 3D image viewing on the screen.
Item
Yes
The elapsed time is displayed in
one-hour increments after you start
watching 3D images.
No Hide the time.
3D test
This function displays 3D images for testing the 3D
operation. Clicking “Start” on the screen plays back
3D test images.
NOTE
• If you press > during playback, the previous screen
will be displayed.
3D glasses control
To enable this function, set the location of the TV to
“STORE” (Page 14). Selecting “Yes” prevents the 3D
glasses from receiving 3D signals from other TVs.
Enjoying 3D image viewing