DAB (Digital Audio Broadcasting)

PRESET MEMORY

The PRESET MEMORY mode is used to assign up to 99 preset numbers to DAB services.

1Tune into the DAB service you would like to assign a preset number to.

2Press MEMORY.

The MEMORY indicator flashes for about ten seconds.

MEMORY

MEMORY

Flashes

y

There are two ways to select a preset DAB service: either by

using / or the numeric buttons.

3a Press / to browse through the assigned preset DAB service numbers in the registry list.

When not assigned, “EMPTY” appears next to the number. Continue pressing the button until “EMPTY” appears. You can also choose the assigned preset number. In this case, the previous service is replaced with the current service.

ENTER

3b Use the numeric buttons to enter a preset number.

For example, to assign “56” to the current DAB service:

MY BEAM

5PRESET 5_

MY SUR.

PRESET 56

6

 

If the number entered already exists (i.e. already assigned to a service), then the previous service is replaced with the current service.

4Press MEMORY to assign the indicated preset number to the current DAB service.

The MEMORY indicator turns off.

MEMORY

y

You can also press ENTER to assign the indicated preset number.

55 EMPTY

Appears on the front panel display

y

Press / to move to the top of the DAB service list.

50 En

Page 52
Image 52
Yamaha YSP-40D owner manual 50 En, 3b Use the numeric buttons to enter a preset number, Appears on the front panel display