DAB (Digital Audio Broadcasting)
3Press ENTER to confirm your selection.
ENTER
The unit begins scanning the selected band(s) for DAB ensembles.
•During the scan, “Scanning” appears in the front panel display.
•When the scan has been completed, “FINISH” appears in the front panel display, followed by the number of a receivable DAB service.
“FINISH [###]” is displayed for three seconds.
Scanning xx%
FINISH [015]
(Example: if 15 services were found.)
After three seconds, this unit returns to the DAB tuning mode automatically.
BBC Radio 4
If the INIT SCAN operation was not successful, “Not Available” appears in the front panel display.
FINISH [000]
Not Available
y
See the DAB section in “Troubleshooting” for further details or proper remedies (see page 116).
If there are no preset DAB services, “Initiate Scan” or “Not Available” appears in the front panel display.In this time, press 
/ 
to start INIT SCAN automatically.
TUNE AID
TUNE AID displays the strength of the DAB signal being received by this unit in the front panel display. Use TUNE AID to adjust the positioning of the indoor DAB antenna and this unit and discover which setup has the best reception state. It is recommended that you use TUNE AID when setting up this unit in order to maximize DAB reception ability.
1Access DAB MENU by following steps 1 through 4 as described in “Accessing DAB MENU” on page 53.
“INIT SCAN” appears in the front panel display.
INIT SCAN
2Press 
once.
“TUNE AID” appears in the front panel display.
ENTER | TUNE AID |
|
3Press ENTER.
The signal strength level of the selected channel appears in the front panel display. The signal strength ranges from 00 (none) to 100 (best).
ENTER | 11B / LEVEL: 80 |
4Press 
/ 
to switch to another channel label.
The signal strength level of the new channel appears in the front panel display. For a list of DAB frequencies, see “DAB frequency table” on page 119.
ENTER 
11C / LEVEL: 40
5Press ENTER to exit from TUNE AID.
The unit returns to the TUNE AID menu display.
ENTER | TUNE AID |
