104 En
Adjusting the system parameters
4Press / to switch between “P.INPUT: ON”
and “P.INPUT: OFF”.
• Select P.INPUT: ON to enable the INPUT key on
the front panel.
• Select P.INPUT: OFF to disable the INPUT key on
the front panel. “F.PANEL KEY” is automatically
set to “ON”.
5Press STANDBY/ON on the remote control to
set this unit to the standby mode.
The new setting will be activated when you turn on
the power of this unit next time.
You can disable the front panel keys except when you
adjust the system parameters.
1Repeat steps 1 to 3 in “Using the system
parameters” on page98.
2Set the operation mode selector to YSP.
3Press / so that “F.PANEL KEY” is
displayed in the front panel display.
ENTER

P.INPUT: ON

P.INPUT: OFF

STANDBY/ON
Disabling the front panel keys
YSP
TV/AV
ENTER

F.PANEL KEY