
■OSD SET (OSD settings)
Use to adjust the display position and to set the display time of the OSD.
B)OSD SET
.OSD SHIFT;;;;;;;;;;0
OSD DISPLAY TIME;;;ON
[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust toward the – (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it. Choices:
Initial setting: 0
OSD DISPLAY TIME (OSD display time)
Use to set the interval for which the OSD screen is displayed after an operation.
Choices: ON, 10s, 30s
•Select ON to show the OSD screen constantly.
•Select 10s to turn off the OSD screen 10 seconds after an operation.
•Select 30s to turn off the OSD screen 30 seconds after an operation.
y
The OSD display time setting is available for your iPod (see page 58).
■UNIT SET (Unit settings)
Use this to change the display unit of measurement. Choices: METERS, FEET
C)UNIT SET
pMETERS | FEET |
[p]/[p]:Select [ENTER]:Return
•Select METERS to enter distances in meters.
•Select FEET to enter distances in feet.
Note
If you change this setting, the adjusted sound beam settings may change.
MANUAL SETUP
OPERATION | ADVANCED |
|
|
English