Continued from the front

3 Carry out the AUTO SETUP (IntelliBeam)

Carry out the AUTO SETUP to adjust the settings that best match your listening environment.

The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress.

6Set the operation mode selector

to YSP.

This unit switches to the YSP operation mode.

ENHANCER ENTRYMENU

TV/AV

ENTER

YSP

10Press ENTER to start the AUTO SETUP procedure, and then

leave the room within 10 seconds.

The following screen appears on the TV. Leave the room within 10 seconds before the AUTO SETUP procedure starts.

ENHANCER

ENTRY

MENU

 

 

AUTO SETUP START

4

Enjoying surround sound

Enjoy TV or DVD digital audio in surround sound.

For instructions on how to operate or set your TV or DVD player, refer to the owner’s manual supplied with each component.

Enjoying DVDs in surround sound

Enjoying TV in surround sound

jack on the front panel.

You may want to use the supplied cardboard microphone stand for the AUTO SETUP. Assemble the stand and place the IntelliBeam microphone on top of it as shown below.

1

2

3

4

INTELLIBEAM MIC

IntelliBeam microphone (supplied)

Cardboard microphone stand (supplied)

2Set the IntelliBeam microphone at your normal listening position.

DISPLAY

RETURN

7Press and hold AUTO SETUP for

more than 2 seconds.

The menu screen appears on the TV.

If the menu screen does not appear, check the OSD video pin cable (see the connection example on the front page).

 

SEARCH

MEMORY

AUTO SETUP

DAB

 

 

PREPARATION & CHECK

 

AUTO

 

Please connect the MIC.

VOL MODE

SETUP INPUTMODE SLEEP

Please place the MIC at least

 

 

 

1.8m/6ft away from the YSP

 

 

 

unit. The MIC should be set

5BEAM

ST+3BEAM

3BEAM

at ear level when seated.

Measurement takes about 3min.

 

 

 

1

2

3

After [ENTER] is pressed,

please leave the room.

[ENTER]:Start [RETURN]:Cancel

 

 

Will begin in 10sec

 

TV/AV

Please leave the room

 

ENTER

 

 

YSP

**--------

 

 

DISPLAY

RETURN

[RETURN]:Cancel

 

The setup screen automatically changes during the AUTO SETUP procedure.

When the AUTO SETUP procedure is completed, the following screen appears on the TV.

SHOW RESULT

MEASUREMENT COMPLETE

BEAM MODE :5 BEAM

SUBWOOFER :NOT APPLICABLE

[ENTER]:Save set-up [RETURN]:Do not save set-up

If “ENVIRONMENT CHECK (FAILED) is displayed, see page 39 in the Owner’s Manual and then run the procedure again.

1Select the DVD video input on your TV.

2Set the operation mode selector

to YSP.

This unit switches to the YSP operation mode.

TV/AV

ENTER

YSP

DISPLAY

RETURN

1Select the TV channel using the remote control supplied with your TV.

2Set the operation mode selector

to YSP.

This unit switches to the YSP operation mode.

TV/AV

ENTER

YSP

DISPLAY

RETURN

Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam microphone at the same height as your ears would be when you are seated.

8Check the following points.

About the IntelliBeam microphone

yHint

• The result may differ depending on the environment.

• If any error occurs, the corresponding error message appears

31) Press DVD on the remote

control of this unit.

3Press TV on the remote control

of this unit.

IntelliBeam

Upper bound

microphone

position of the

 

microphone

Center height of

this unit

 

Within 1 m

 

 

 

(3.3 ft)

 

 

 

Within 1 m

Center line

 

Cardboard

(3.3 ft)

 

Listening

Cardboard

IntelliBeam

microphone stand

position

microphone

More than 1.8 m (6.0 ft)

microphone

 

 

Place the IntelliBeam microphone on the extended center line of this unit and 1.8 m (6.0 ft) or more away from it. Also, make sure place the IntelliBeam microphone within 1 m (3.3 ft) upper or lower from the center height of this unit.

Is the microphone placed on an imaginary center line drawn from this unit?

Is the microphone placed within 1 m (3.3 ft) upper or lower from the center height of this unit?

Is the microphone placed more than 1.8 m (6.0 ft) from the

front of this unit?

About the room environment

• Is your listening room kept as quiet as possible?

on the screen. In this case, see “Error messages for AUTO

SETUP” on page 40 in the Owner’s Manual and then follow

the instructions. To start the AUTO SETUP procedure once

again, press RETURN.

11Press ENTER.

The following screen appears on the TV for 2 seconds and then the menu screen disappears from the TV.

This unit switches to the DVD playback mode.

DOCK

DVD AUX1 AUX2 AUX3

INPUT1 TV MACRO

STB TV

2)Play back the supplied demonstration DVD on the DVD player.

This unit switches to the TV playback mode.

INPUT1 TV MACRO

STB TV

SEARCHMEMORY

DAB

AUTO

VOL MODE SETUP INPUTMODE SLEEP

5BEAM ST+3BEAM 3BEAM

1 2 3

Lower bound position

stand

of the microphone

 

9Prepare to leave the room.

The best setting may not be done if you are in the room. Prepare to leave the room in 10 seconds after pressing ENTER in step 10.

ENHANCER ENTRYMENU

 

AUTO SETUP COMPLETE

TV/AV

Please remove the MIC from

the YSP and the listening

ENTER

position.

YSP

4

Input channel indicators

Check the digital signal being output at this unit.

The input channel indicators (see page 8 in the Owner’s Manual) are lit in the front panel display, and they switch according to the channel composition of the corresponding input source. If the sound is output from your TV speakers, mute the volume on your TV. For details about digital audio input signals, see page 62 in the Owner’s

3Press STANDBY/ON on the

remote control.

The power of this unit turns on.

4

Turn on the power of your TV.

yHint

• When leaving the room, bring this guide with you.

• Wait outside the room during the AUTO SETUP procedure.

• The AUTO SETUP procedure takes about 3 minutes.

DISPLAY

RETURN

Manual.

VOLUME

CH

TV VOL

Before operations, insert batteries into the remote control (see page 29 in the Owner’s Manual).

If necessary, adjust the volume level of this unit.

If you have connected the subwoofer, set the volume and crossover/high cut frequency. Refer to the note on page 35 in the Owner’s Manual.

 

 

 

Subwoofer

 

 

 

VOLUME

CROSSOVER/

STANDBY/ON

POWER

POWER

 

HIGH CUT

 

 

 

TV

AV

 

 

 

 

DOCK

 

 

DVD AUX1

AUX2

AUX3

MIN MAX

MIN MAX

INPUT1 TV MACRO

5

Select the appropriate video input on your TV.

If the OSD video pin cable is connected to the video input 1 on the TV as shown in the connection example, switch the video input to “1”.

• To cancel the AUTO SETUP procedure after it is started,

press RETURN.

12Disconnect the IntelliBeam

microphone.

The AUTO SETUP has completed. Keep the IntelliBeam microphone in a safe place.

The settings are automatically saved in the system memory.

INTELLIBEAM MIC

5Press VOLUME +/- on the remote control to adjust the volume level of this unit.

6Press one of the beam mode buttons on the remote control

to select the desired beam mode.

Select one of the six beam modes that best matches the current input source of this unit. For further information on the beam modes, see page 60 in the Owner’s Manual.

MUTE

TV INPUT

TV MUTE

5BEAM

ST+3BEAM

3BEAM

1

2

3

STEREO

MY BEAM

MY SUR.

4

5

6

To fine-tune the listening environment parameters manually or make advanced settings for speaker positions,

sound beams, etc., see “MANUAL SETUP” on page 80 in the Owner’s Manual.

Page 129
Image 129
Yamaha YSP-40D owner manual About the IntelliBeam microphone, About the room environment, Subwoofer