Yamaha YSP-40D owner manual Items used for connections and operations This guide, Audio connection

YSP-40D

QUICK REFERENCE GUIDE

Items used for connections and operations

in this guide

s Audio pin cable (x1)

s OSD* video pin cable (x1) s Optical cable (x1)

s Coaxial cable (x1)

s AC power supply cable (x1) s IntelliBeam microphone (x1)

s Cardboard microphone stand (x1) s Demonstration DVD (x1)

*OSD: On-Screen Display

2 Connecting external components to this unit

Connecting external components such as a TV or DVD player to this unit.

Connect your TV or DVD player to this unit using appropriate cables as shown below. After all connections are complete, plug the power supply cable into the AC wall outlet. For further information on connecting other components, see pages 17 to 28 in the Owner’s Manual.

Connection	This connection example shows a way to make the most of the capability of this unit. You can
	enjoy DVD audio and video with higher quality via the HDMI cable. In case your TV does not have
example 2	a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite

This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.

Connection	This connection example shows a way to connect external components such as a TV or DVD player to
	this unit by using the supplied cable. You can enjoy the multi-channel audio from the DVD player and the
example 1	analog/digital audio from the TV. Use the video pin cable supplied with your DVD player to make a video
	connection between your DVD player and this unit.

tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see “Connections

using HDMI cables” on page 19 in the Owner’s Manual.

TV

1 Installing this unit

TV

DVD player

DVD player	Digital satellite tuner/Cable TV tuner/
	Digital airwave tuner

Decide where to install this unit.

Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.

Install this unit in the exact center of the wall when it is	Install this unit in the corner at a 40˚ to 50˚ angle from the
measured from the left and right corners.	adjacent walls.

Optical	Analog		Video
digital	audio		input
output	output		2
	R	L
			1

		1. Pull out the cap	Pull out the cap
			before
Coaxial	Video		connecting the
			optical cable,
digital	output
output		2. Check the direction
			and then check
			the direction to
			insert the
			cable.

HDMI		HDMI
INPUT	OUTPUT

HDMI connection

AUX1

This connection is not necessary if your TV has a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. Use the optical cable supplied with this unit to make an audio connection between your TV and this unit.

Video connection

Subwoofer

1(Sold separately)

2(Sold separately)

DVD

IN

For details, see “Connection example 1”.

An object, such as furniture An object, such as furniture

2

1 3 4

OUT

Front left channel	40˚ to 50˚	Front left channel
Center channel		Center channel
Front right channel		Front right channel
Surround left channel		Surround left channel
Surround right channel		Surround right channel

*The rear panel illustration shows jacks and their names to

COMPONENT

help you find them easily. They are not exactly the same

as the ones on the actual rear

VIDEO OUT

panel of this unit.

FM75		ANTENNA
UNBAL.						Audio connection
			SUBWOOFER
COMPONENT		COMPONENT
					DVD	AUX 2
					COAXIAL
					OPTICAL
STB		DVD/AUX 2	AUX 1 TV/STB AUX 1	DOCK	TV/STB	AUX 1
	VIDEO IN		AUDIO IN		DIGITAL IN

*The rear panel illustration shows jacks and their names to help you find them easily.

They are not exactly the same as the ones on the actual rear panel of this unit.

HDMIYSP-40D

Install this unit using a rack, etc.

Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. In case you install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.

YSP-40D	Do not plug the power supply
	cable into an AC wall outlet
To the AC wall outlet	until all connections are
	complete.

AL.	ANTENNA
		SUBWOOFER
	COMPONENT
	DVD/AUX 2	AUX 1 TV/STB AUX 1
VIDEO IN		AUDIO IN

			Do not plug
			the power
	To the AC wall outlet		supply cable
			into an AC wall
Subwoofer			outlet until all
		3	connections
			are complete.

For further information on installation, see page 14 in the Owner’s Manual.

Connect cables in the following order. 5

Audio connection

The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of cloth on the floor in step 2.

1 Place this unit in front of	2 Place this unit upside	3 Install this unit in the	4 Installation is completed.
the rack.	down and connect this unit	rack.
	to your TV and DVD player.

yHint

•To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.

•You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions supplied with the metal wall bracket.

Note

Be careful not to leave scratches on this unit or the rack.

Supplied
1 Audio pin cable	4 Digital audio pin cable
(Outputs TV analog audio sounds from this unit)	(Outputs DVD digital audio sounds from this unit)
2 OSD video pin cable	5 AC power supply cable
(Displays the DVD analog video and the YSP-40D menu	(Connects this unit to the AC wall outlet)
screen on the TV)

3Optical cable

(Outputs TV digital audio sounds from this unit)

y Hint
Check whether the digital audio output of your TV and DVD	If you have connected external components,
player is turned on.	follow the steps on the backside to start the	Continued
	AUTO SETUP procedure.	on the back

Connect cables in the following order.

Supplied

3AC power supply cable

(Connects this unit to the AC wall outlet)

yHint

If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to turn on or off the power, select the audio output component, and adjust the volume level of this unit.

Note

Check whether the digital audio output of your TV and DVD player is turned on.

Sold separately

1HDMI cable

(Displays the DVD digital video and the YSP-40D menu

screen on the TV)

2HDMI cable

(Inputs DVD digital audio/video signals to this unit)

If you have connected external components,
follow the steps on the backside to start the	Continued
AUTO SETUP procedure.	on the back

Printed in Malaysia WK94440 [En] C2007 All rights reserved.