Yamaha YSP-40D owner manual 12

Controls and functions
12 En
FDVD player/VCR control buttons
Control your DVD player or VCR (see pages109 and
110).
GMy Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page67).
HTV POWER
Turns on the power of your TV or sets it to the standby
mode (see page108).
IAV POWE R
Turns on the power of the selected component or sets it to
the standby mode (see pages109 and 110).
JINPUT1
Switches the input source on your TV (see page108).
KMACRO
Use to set the TV macro (see page111).
L/5
Selects a DAB service or a preset DAB service number
when this unit is receiving a DAB service (see page50).
This function is available only when DAB services are preset.
MSLEEP
Sets the sleep timer (see page76).
NINPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page97).
OBeam mode buttons
Change the beam mode settings (see pages60, 66, and
67).
PSUR. DECODE
Selects the surround mode for playback (see page63).
QMENU
Displays the setup menu on your TV monitor (see
pages36 and 81).
ROperation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
SRETURN
Selects sleep timer settings or returns to the previous SET
MENU screen.
TTV VOL +/–
Adjusts the volume level of your TV (see page108).
UCH +/–
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages108 and 110).
VTV MUTE, CODE SET
Mutes the audio output of your TV (see page108).
Sets up remote control codes (see page107).
Note