MANUAL SETUP

e)HDMI CONTROL

OFF

pON XXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX

[p]/[p]:Select [ENTER]:Return

Select ON to enable the HDMI control. The signals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in the standby mode.

Select OFF to disable the HDMI control. The signals input at the HDMI IN jacks are not output at the HDMI OUT jack when this unit is in the standby mode.

DISPLAY MENU

Use to manually adjust the various parameters related to the display.

SET MENU MANUAL SETUP DISPLAY MENU

4)DISPLAY MENU

.A)F.DISPLAY SET B)OSD SET C)UNIT SET

[p]/[p]:Up/Down [ENTER]:Enter

F.DISPLAY SET

(Front panel display settings)

Use to adjust the brightness and display settings of the front panel display.

A)F.DISPLAY SET

.STANDARD DIMMER;;;;;OFF AUTO DIMMER

;;;;;;;;;;;;;OFF SCROLL;;;;;;;;;;;;CONT.

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

STANDARD DIMMER (Standard dimmer)

Use to adjust the brightness of the front panel display when you operate this unit by using the control buttons on the front panel or on the remote control.

Choices: –2, –1, OFF

AUTO DIMMER (Auto dimmer)

If no operation is performed for a specified period of time, the front panel display dims. Use to adjust the brightness of the front panel display in this case.

Choices: OFF (the same brightness as the STANDARD DIMMER setting), –1 to –3 (based on the STANDARD DIMMER setting), DISPLAY OFF

SCROLL (Front panel display scroll)

Use to select the mode to display information in the front panel display when operating your iPod.

Choices: CONT., ONCE

Select CONT. to continue to scroll the display.

Select ONCE to scroll the display to the end once, after which the first 15 characters appear and stay.

92 En

Page 94
Image 94
Yamaha YSP-40D owner manual 4DISPLAY Menu, Af.Display Set, 92 En, Front panel display settings