Lexmark Guide to 84 Replace Photoconductor for Printers

84 Replace black pc unit

The black photoconductor is exhausted. Install a new photoconductor.

Note: To learn how to replace the black photoconductor, press until Show Me appears, and then press .

84 Replace color pc units

One or more of the color photoconductors are exhausted. Install new cyan, magenta, and yellow photoconductors.

Note: To learn how to replace the photoconductors, press until Show Me appears, and then press .

84 Unsupported <color> pc unit

Replace the specified photoconductor(s).

Note: The printer has four photoconductors: cyan, magenta, yellow, and black. The cyan, magenta, and yellow photoconductors must all be replaced at the same time. The black photoconductor can be replaced separately.

88 <color> toner low

When this message appears, the toner is low. When the print becomes faded, replace the toner cartridge.

•To clear this message and continue printing, press until Continue appears, and then press .

88 Replace <color> toner

1The toner cartridge is exhausted. Replace the specified toner cartridge.

Note: To learn how to replace a toner cartridge, press repeatedly until Show Me appears, and then press .

2Clear the paper path to clear the message and continue printing.

200–285.yy Paper jam

1Clear the paper path.

2After clearing the paper path, press to resume printing.

289 Staple error <x>

1Clear the jam from the specified stapler area(s).

2Press until Continue appears, and then press to continue printing.

900–999 Service <message>

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Check all cable connections.

4Connect the power cord to a properly grounded outlet.

5Turn the printer back on.

If the service message appears again, contact Customer Support, and report the message.

121