Lexmark C935 manual Serial, Some held jobs were not restored, Some held jobs will not be restored

Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored.

Serial <x>

The printer is using a serial cable connection. The serial port is the active communication link.

Some held jobs were not restored

Press until Continue appears, and then press to delete the specified job.

Some held jobs will not be restored

•Press until Continue appears, and then press to clear the message and resume printing.

•Cancel the current job.

Standard Bin Full

Remove the stack of paper from the standard exit bin to clear the message.

Staples <x> empty or misfed

Load the specified staple cartridge into the finisher to clear the message and continue stapling.

Staples <x> low or missing

Load the specified staple cartridge in the finisher to clear the message.

Submitting Selection

Wait for the message to clear.

Tray <x> Empty

Load paper in the tray to clear the message.

Tray <x> Low

Load paper in the specified tray to clear the message.

Tray <x> Missing

Insert the specified tray into the printer.

USB/USB <x>

The printer is using a USB cable connection. The USB port is the active communication link.

Waiting

The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data.

•Press to print the contents of the buffer.

•Cancel the current print job.

115