Lexmark C935 manual Symbol Set, PCL Emulation Settings

Menu item	Description
Symbol Set	Specifies the symbol set for each font name
10U PC-8	Notes:
12U PC-850
	•	10U PC-8 is the US factory default setting.
	•	12U PC-850 is the international factory default setting.
	•	A symbol set is a set of alphabetic and numeric characters,
		punctuation, and special symbols. Symbol sets support the different
		languages or specific programs such as math symbols for scientific
		text. Only the supported symbol sets are shown.
PCL Emulation Settings	Changes the point size for scalable typographic fonts
Point Size	Notes:
1.00–1008.00
	•	12 is the factory default setting.
	•	Point Size refers to the height of the characters in the font. One point
		equals approximately 1/72 of an inch.
	•	Point sizes can be increased or decreased in 0.25-point increments.
PCL Emulation Settings	Specifies the font pitch for scalable monospaced fonts
Pitch	Notes:
0.08–100	•	10 is the factory default setting.
	•	Pitch refers to the number of fixed-space characters per inch (cpi).
	•	Pitch can be increased or decreased in 0.01-cpi increments.
	•	For nonscalable monospaced fonts, the pitch appears on the display
		but cannot be changed.
PCL Emulation Settings	Specifies the orientation of text and graphics on the page
Orientation	Notes:
Portrait
	•	Portrait is the factory default setting.
Landscape
	• Portrait prints text and graphics parallel to the short edge of the page.
	•	Landscape prints text and graphics parallel to the long edge of the
		page.
PCL Emulation Settings	Specifies the number of lines that print on each page
Lines per Page	Notes:
1–255
	•	60 is the US factory default setting. 64 is the international default
60
		setting.
64
	•	The printer sets the amount of space between each line based on the
		Lines per Page, Paper Size, and Orientation settings. Select the
		desired Paper Size and Orientation before setting Lines per Page.
PCL Emulation Settings	Sets the printer to print on A4-size paper
A4 Width	Notes:
198 mm	•	198 mm is the factory default setting.
203 mm
	•	The 203-mm setting sets the width of the page to allow the printing of
		eighty 10-pitch characters.

94