Lexmark C935 manual Print is too light, Make sure Color Saver is set to Off, Check the paper

A toner cartridge may be defective

Replace the toner cartridge.

Print is too light

These are possible solutions. Try one or more of the following:

Check the darkness, brightness, and contrast settings

The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too high.

•From Print Properties, change these settings. Note: This solution applies to Windows users only.

•From the Quality menu, change these settings.

Has the paper absorbed moisture due to high humidity?

•Load paper from a fresh package.

•Store paper in its original wrapper until you use it.

Check the paper

Avoid textured paper with rough finishes.

Check the Paper Type setting

Make sure the Paper Type setting matches the paper loaded in the tray.

Make sure Color Saver is set to Off

Color Saver may be set to On.

Is the toner low?

When 88 <color> toner low appears, order a new cartridge.

A toner cartridge may be defective

Replace the toner cartridge.

159