Lexmark C935 manual Menu item, Description, NPA Mode, Network Buffer, Job Buffering, Mac Binary PS

Menu item	Description
NPA Mode	Sets the printer to perform the special processing required for bidirectional
Off	communication following the conventions defined by the NPA protocol
Auto	Notes:
	•	Auto is the factory default setting.
	•	Changing this setting from the control panel and then exiting the menus
		causes the printer to restart. The menu selection is updated.
Network Buffer	Sets the size of the network input buffer
Auto	Notes:
3k to <maximum size allowed>
	•	Auto is the factory default setting.
	•	The value can be changed in 1k increments.
	•	The maximum size allowed depends on the amount of memory in the
		printer, the size of the other link buffers, and whether Resource Save is
		set to On or Off.
	•	To increase the maximum size range for the Network Buffer, disable or
		reduce the size of the parallel, serial, and USB buffers.
	•	Changing this setting from the control panel and then exiting the menus
		causes the printer to restart. The menu selection is updated.
Job Buffering	Temporarily stores jobs on the printer hard disk before printing
On	Notes:
Off	•	Off is the factory default setting.
Auto
	•	The On value buffers jobs on the printer hard disk. This menu selection
		appears only when a formatted disk is installed and is not defective.
	•	The Auto setting buffers print jobs only if the printer is busy processing
		data from another input port.
	•	Changing this setting from the control panel and then exiting the menus
		causes the printer to restart. The menu selection is updated.
Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
On	Notes:
Off
	•	Auto is the factory default setting.
Auto
	•	The Off setting filters print jobs using the standard protocol.
	•	The On setting processes raw binary PostScript print jobs.

102