Lexmark C935 manual Specify the paper height and width, Specify a feed direction

5Press repeatedly until Units of Measure appears, and then press .

6Press repeatedly until appears next to the correct unit of measure, and then press .

Submitting Selection appears, followed by the Universal Setup menu.

Specify the paper height and width

Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.

1From the Universal Setup menu, press repeatedly until Portrait Width or Portrait Height appears, and then press .

Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width setting.

2Press to decrease the setting or to increase the setting, and then press .

Submitting Selection appears, followed by the Universal Setup menu.

Specify a feed direction

Short Edge is the factory default setting for feed direction for Universal paper settings. The Feed Direction menu will not appear from the Universal Setup menu unless Long Edge is an available setting. If necessary, specify whether the short or long edge of the paper will enter the printer first.

1From the Universal Setup menu, press repeatedly until Feed Direction appears, and then press .

2Press repeatedly until appears next to the correct feed direction, and then press .

Submitting Selection appears.

24