Lexmark C935 Programming System Code DO NOT POWER OFF, Reading USB drive DO NOT REMOVE, Ready

Warning: Do not turn the printer power off while Programming flash appears on the display.

Programming System Code DO NOT POWER OFF

Wait for the message to clear.

Warning: Do not turn the printer power off while Programming System Code appears on the display.

Reading USB drive DO NOT REMOVE

Wait for the message to clear.

Ready

The printer is ready to receive print jobs.

Remote Management Active DO NOT POWER OFF

The printer settings are being configured. Wait for the message to clear.

Warning: Do not turn the printer power off while Remote Management Active appears on the display.

Remove paper from all bins

Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue printing.

Remove paper from standard bin

The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and continue printing.

Remove paper from bin <x>

The specified output bin has reached its capacity. Remove paper from the specified bin to clear the message and continue printing.

Resetting the printer

Wait for the message to clear.

Restore Held Jobs?

•Press until Continue appears, and then press to restore all held jobs stored on the printer hard disk.

•Press until Do not restore appears, and then press . No print jobs will be restored.

Restoring Factory Defaults

Wait for the message to clear.

When factory default settings are restored:

•All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.

•All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom settings in the Serial <x>, Network, Infrared, LocalTalk, and USB menus.

Restoring Held Job(s) x/y

•Wait for the message to clear.

•Press until Quit restoring appears, and then press to delete unrestored held jobs.

114