Lexmark C935 PDF menu, Job Acct Stat, Hex Trace, Coverage Estimator, LCD Contrast, LCD Brightness

Menu item	Description
Job Acct Stat	Prints a list of all stored job statistics or deletes the information from the printer
Print	hard disk
Clear	Notes:
	•	A printer hard disk must be installed in the printer and operating properly
		for this menu item to be available.
	•	Selecting Print prints a list of statistics.
	•	Clear deletes all job statistics stored on the printer hard disk. Clearing
		job account statistics appears on the display.
	•	The Clear selection will not appear if Job Accounting is set to
		MarkTrackTM.
Hex Trace	Assists in isolating the source of a print job problem
Activate	Notes:
	•	When Activate is selected, all data sent to the printer is printed in
		hexadecimal and character representation and control codes are not
		executed.
	•	To exit Hex Trace, turn the printer off or reset the printer.
Coverage Estimator	Provides an estimate of the percentage coverage of cyan, magenta, yellow,
Off	and black on a page. The estimate is printed on a separator page.
On	Note: Off is the factory default setting.
LCD Contrast	Adjusts the contrast lighting of the display
1–10	Notes:
	•	5 is the factory default setting.
	•	A higher setting makes the display appear lighter.
	•	A lower setting makes the display appear darker.
LCD Brightness	Adjusts the brightness of the backlight on the display
1–10	Notes:
	•	5 is the factory default setting.
	•	A higher setting makes the display appear lighter.
	•	A lower setting makes the display appear darker.

PDF menu

Menu item

Scale to Fit

Yes

No

Annotations

Do Not Print Print

Description

Scales page content to fit the selected paper size Note: No is the factory default setting.

Prints annotations in a PDF

Note: Do Not Print is the factory default setting.

92