Lexmark C935 Solving printing problems, Control panel display is blank or displays only diamonds

2Press the A1 green lever down to its normal position.

3Close Door A.

Solving printing problems

Multiple-language PDFs do not print

The documents contain unavailable fonts.

1Open the document you want to print in Adobe Acrobat.

2Click the printer icon. The Print dialog appears.

3Select Print as image.

4Click OK.

Control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.

Jobs do not print

These are possible solutions. Try one or more of the following:

Make sure the printer is ready to print

Make sure Ready or Power Saver appears on the display before sending a job to print. Press to return the printer to the Ready state.

Check to see if the standard exit bin is full

Remove the stack of paper from the standard exit bin, and then press .

Check to see if the paper tray is empty

Load paper in the tray.

149