Lexmark C935 manual Timeouts, Print Recovery, Printer Language

Menu item	Description
Timeouts	Sets the amount of time in seconds that a network print job
Network Job Timeout	can take before it is canceled
0–255	Notes:
	•	90 seconds is the factory default setting.
	•	A setting value of 0 disables the timeout.
	•	If a value of 1–9 is selected, the setting will be saved as
		10.
Print Recovery	Lets the printer automatically continue printing from certain
Auto Continue	offline situations when not resolved within the specified time
	period
Disabled
5–255	Notes:
	•	Disabled is the factory default setting.
	•	5–255 is a range of time in seconds.
Print Recovery	Specifies whether the printer reprints jammed pages
Jam Recovery	Notes:
On
	•	Auto is the factory default setting. The printer reprints
Off
		jammed pages unless the memory required to hold the
Auto
		pages is needed for other printer tasks.
	•	On sets the printer to always reprint jammed pages.
	•	Off sets the printer to never reprint jammed pages.
Print Recovery	Lets the printer successfully print a page that may not have
Page Protect	printed otherwise
On	Notes:
Off	•	Off is the factory default setting. Off prints a partial page
		when there is not enough memory to print the whole page.
	•	On sets the printer to process the whole page so that the
		entire page prints.
Printer Language	Sets the default printer language
PCL Emulation	Notes:
PS Emulation	• PCL emulation uses a PCL interpreter for processing print
PPDS Emulation
		jobs. PostScript emulation uses a PS interpreter for
		processing print jobs. PPDS emulation uses a PPDS
		interpreter for processing print jobs.
	•	The factory default printer language varies depending on
		the type of printer purchased.
	• Setting a printer language as the default does not prevent
		a software program from sending print jobs that use
		another printer language.

83