Lexmark C935 Universal Setup menu, Bin Setup menu, Units of Measure, Portrait Width, Output Bin

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Menu item	Description
Units of Measure	Identifies the units of measure
Inches	Notes:
Millimeters	•	Inches is the US factory default setting.
	•	Millimeters is the international factory default setting.
Portrait Width	Sets the portrait width
3–48 inches	Notes:
76–1219 mm
	• If the width exceeds the maximum, the printer uses the maximum
		width allowed.
	•	12 inches is the US factory default setting. Inches can be
		increased in 0.01-inch increments.
	• 305 mm is the international factory default setting. Millimeters can
		be increased in 1-mm increments.
Portrait Height	Sets the portrait height
3–48 inches	Notes:
76–1219 mm	•	If the height exceeds the maximum, the printer uses the
		maximum height allowed.
	•	19 inches is the US factory default setting. Inches can be
		increased in 0.01-inch increments.
	• 483 mm is the international factory default setting. Millimeters can
		be increased in 1-mm increments.
Feed Direction	Specifies the feed direction
Short Edge	Notes:
Long Edge	•	Short Edge is the factory default setting.
	•	Long Edge appears only if the longest edge is shorter than the
		maximum length supported in the tray.

Bin Setup menu

Menu Item

Output Bin

Standard Bin

Bin 1

Bin 2

Description

Identifies installed output bins

Note: Standard Bin is the factory default setting.

78